Loading... Please wait...HIGH STRENGTH STEEL GEARS ... BECAUSE PLASTIC GEARS BREAK - That's Why You Are On This Page To Begin With !!!!
**** NEED SPARE POWER FOLDING NON-TOW MIRROR PARTS ? PLEASE CLICK HERE FOR THE SPARE PARTS PAGE ****
NOTE : IF YOU ARE ORDERING A COMPLETE DRIVE UNIT ($229.99) PLEASE CHECK WITH US TO ENSURE AVAILABILITY OF CORES.
NOTE 2 : If you are ordering a complete drive unit for a 2014+ pickup model you WILL need to send us your drive unit only (not complete mirror assy). Please email us for the shipping address - paul@gruvenparts.com
NOTE 3 : *** You Cannot Just Install a Metal Gear Without Also Changing The Motor To The GruvenParts INTERNALLY GROUNDED MOTOR ! You Will Short Out the Body Control Module. All Of Our Kits Come With New Motors Which Are Internally Grounded and Work With Metal Gears - So Don't Just Replace the Gear, You Must Replace Both Gear AND Motor When Going to Metal !!! ***
NOTE 4 : *** THESE ARE NOT FOR TOWING MIRRORS - PLEASE CLICK HERE FOR TOWING MIRRORS PRODUCT PAGE ****
DIY Library - Please Select Appropriate DIY for your Vehicle (Non Towing Mirrors!)
2007-2013 GM Silverado, Sierra, Tahoe, Suburban + 2014 Tahoe/Suburban
2014-2018 Sierra/Silverado
2015-2019 Tahoe/Suburban
Please visit this product page
Traverse/Acadia/Outlook - All Years Supplemental Instructions
** 2 Options Are Available ***
Note that if you chose Option 2, you will either need to send in your unit for repair directly, or wait approximately 2 months for us to get a unit to repair. These are becoming hard to find and people arent returning their cores as often anymore for some reason. We can usually repair sent in units same day to minimize down time as you cant install the mirror without the drive unit in place.
Option 1:
Buy strengthened steel gears machined integral to the main spiral shaft + hi-torque motor in quantity 1 set for 1 mirror or 2 sets for 2 mirrors ($64.99 / $99.99).
Option 2:
Buy a rebuilt complete motor drive unit with new hi-torque motor + steel integral gear already installed and tested ($229.99 minus $30 core return = $199.99). Please note when buying the complete drive unit, you must choose passenger side or drivers side, and there is a $30 core refund so be sure to send back your old assembly in repairable condition. Core returns are only applicable to complete drive units and when you are ready to return your core, please email paul@gruvenparts.com for instructions. Your CORE must be rebuildable. We cannot accept units which have parts other than the motor/spur gear broken as cores as we would have no way to rebuild them.
***** PLEASE NOTE WHEN ORDERING THE COMPLETE DRIVE UNIT - If you are in a hurry for this, its best to check with us to see if we have any cores. It could be 4-6 weeks to receive this, based on how many units we have in the shop. People do not send back their cores very quickly, so we are usually waiting. You can send in your own unit to be worked as well, and we will apply the $30 core when you send in and try to work it same day or very quick.
Other Parts Available :
We also carry a limited number of used parts to service these mirrors in case you loose or break something. We have some of everything, so just email paul@gruvenparts.com if you need something. We do now have some used mirror glass drive units for both sides - these are the little motorized units that actually adjust the angle of the mirror glass.
** Product Description **
GruvenParts.com is pleased to announce replacement strengthened STEEL gears and high torque INTERNALLY GROUNDED motors (OEM MOTOR WONT WORK WITH METAL) for the power folding mirrors on most 2007-Present GM trucks including Acadia, Traverse, Enclave, Escalade, Silverado, Avalanche, Tahoe, Suburban, Sierra, Yukon, and Denali. Also fits ALL 2007-Present GMC pick-up trucks. As many have discovered, the folding mirror assembly on these trucks suffers from a thin, weak, plastic spur gear mounted to the main drive shaft. The plastic spur gear cracks at the slightest impact or just wears out over time causing an inoperable folding mirror. The GM motors also get weak and die quickly. Unfortunately, GM will only sell you a complete folding mirror assembly, which will cost you from $700-$1,200 ea after labor and paint, depending on the year/make/model. And that $ would be wasted on another mirror assembly with another weak, plastic spur gear and weak electric motor that will also soon fail. Don't waste time or hard earned money on more GM parts that will also soon fail!
GruvenParts.com has addressed this issue by designing a strengthened integral spiral spur/worm gear shaft made from high strength steel to eliminate the fatigue cracking in the GM plastic gear. We have also designed a replacement high torque electric motor to accompany this new metal gear. Our new electric motor is required when switching out to the metal gear, as the ground circuit in the OEM motor does not allow for a metal gear to be installed. You can chose to buy the gear/motor combo for one or both sides or you can buy complete drive units which are rebuilt and already have the new metal gears and hi torque motor installed in them.
We have thoroughly tested our redesigned integral gear and high torque motor using a new, OEM mirror assembly and computerized test equipment. Our test samples barely showed any wear whatsoever, and the testing did include random wacks against the mirror, jamming the mirror operation as it was folding, and manually stressing the mechanism all in an attempt the break the gear. Each sample was tested more than 5,000 open/close cycles and was still going strong at that point !
This product carries a LIFETIME WARRANTY! Provided you don't burn the vehicle, or otherwise smash the mirror into something, you can send back the motor drive unit to us and we'll replace the gear assembly and get it working again free of charge. You would only be responsible for shipping under this warranty.
** Application **
Gears and Motors Fit Both Passenger and Drivers Side Power Folding Mirrors.
All 2007-Present GM Pick Up Trucks Including all Silverado and Sierra with Non-Towing Power Fold Mirrors -- please note the 2014+ pick up trucks used different plastics on the frame, so disassembly of the mirror frame doesnt match the previous gen DIY. The lower half of the drive unit with all the gears inside IS the same as the previous generation.
All 2007-2014 GM SUV's With Power Folding Non-Tow Mirrors Including Acadia, Traverse, Enclave, Escalade, Tahoe, Suburban, Yukon, and Denali.
This includes (but not limited to) the following mirror assembly part numbers :
25-83-12-36 (25831236), 25-77-98-49 (25779849)
This list of part numbers will continually grow as we build the interchange list. This is in no way complete, as most GM trucks made from 2007-2014 with power folding mirrors will use this gear. If your power folding mirror looks like the mirror shown in the DIY, this gear will fit your vehicle.
... We also have many more products for GM, including the towing mirror gears, 2015-Present SUV non-towing mirror gears, door lock motors, door handle inserts ! Check out the GM section of our website!
Previous | Showing reviews 311-320 of 637 | Next
Posted by Lou on 20th Apr 2020
The parts and work exactly as described. I was able to restore my OEM mirrors.
Customer service is on the spot.
Great company
Posted by Unknown on 19th Apr 2020
I like the whole set up. Video was Wes good except for one thing. Confused as to why I need to grind down those 2 tabs. Saw where a couple people did not. What is the reason for grinding those tabs.
--response --
Thanks and yes the tabs should be ground off. I will add a supplemental article since this seems to be the topic of so much discussion. Those tabs are safety stops that prevent the mirror unit from backdriving in the wind when the plastic gear breaks. But they really stress the unit having to overcome those tabs for each close and open cycle. You dont need them with a proper metal gear, you could never break the metal gear, you would destroy the glass and plastic mirror frame long before.
Paul@GruvenParts.com
Posted by Bob on 15th Apr 2020
Glad I found out about Gruven and their repair/replacement parts for power mirrors. I ordered the motor and spur gear to repair the passenger side mirror on my 2010 Sierra. The online instructions provided by Gruven were an excellent help. Completed the repair successfully without any difficulty. Removing and re-installing the lock ring was the most difficult step. Thanks!
Posted by Robert Stevens on 15th Apr 2020
I was a little nervous to rip everything but the intructional videos and PDFs were fantastic walked me through everything. Trust me you need a vice
Posted by Allan on 29th Mar 2020
Superior parts when compared to the replaced GM OEM parts. Install video is spot on with instruction. Watched the video before ordering the parts and once when the parts arrived. Driver side plastic gear was cracked, so repaired it first. As others have commented the Gruven parts out perform the GM OEM and it is noticeable when you test the repair.
My Notes: (1) Used a scrap piece of 1 inch pipe to depress the spring and turn the locking washer with the motor base held in a vice. This method was easier than a socket and vice grips. (2) did not remove tabs as suggested in the install video. Feared misaligning the gears.
Posted by Jim on 19th Mar 2020
Had a bit of trouble with first side, made a call to Gruven on a Friday about 5pm and left a message. They called me back and got me straightened out about 10 minutes later! Second side went much easier. I could have done a 3rd one in about 25 minutes, now that I'm an "expert"
Posted by James Lightsey on 2nd Mar 2020
Glad I found gruvenparts.com after my power folding drivers side mirror stopped working on my 2011 Silverado 2500HD. Ordered two motors and gears since I figured it was just a matter of time before the passenger side mirror would stop working. This was confirmed after disassembly. The passenger side mirror gear was cracked. Ordered new parts on Friday and received them on the following Monday! Quality of the new parts and instructions were excellent. The power folding mirrors worked flawlessly after the new parts were installed. Thanks gruvenparts.com for an excellent product and for offering an alternative to spending hundreds of dollars at the dealership.
Posted by Dt0wn on 18th Feb 2020
I was quoted $700 to fix the folding mirror by the stealership. I bought this and followed the video instead. I enjoyed a steak dinner with the savings.
--response --
Thanks, wish more people knew, Ive been saying this forever :)
-Paul
Posted by Unknown on 4th Feb 2020
After the mirror would no longer work (put up with it for a while) I found Gruven Parts and read their docs about how to take apart and install the gear. I ordered the part and got it in 4 days. Following the docs and presto all fixed. I am sure that the other side will fail in time and I will get that one fixed to. I decided not to grind off the tabs on the bottom and see if it makes any difference. So far it still moves faster that the original one. Using a socket and vice the spring can be compressed and then use a large pair of pliers to slowly rotate the keeper ring to match up with the bumps then SLOWLY release the spring to take apart. Place a rag over the entire unit when releasing just in case. Put all new grease in while you have it apart. Nice fix and I am very happy with the results.
Posted by John on 27th Jan 2020
Parts are very high quality and fit well. The video of the instructions is detailed and made replacement a breeze. These also operate at least twice as fast as the OEM motors. Great product.
ABOUT SSL CERTIFICATES |