Loading... Please wait...HIGH STRENGTH STEEL GEARS ... BECAUSE PLASTIC GEARS BREAK - That's Why You Are On This Page To Begin With !!!!
**** NEED SPARE POWER FOLDING NON-TOW MIRROR PARTS ? PLEASE CLICK HERE FOR THE SPARE PARTS PAGE ****
NOTE : IF YOU ARE ORDERING A COMPLETE DRIVE UNIT ($229.99) PLEASE CHECK WITH US TO ENSURE AVAILABILITY OF CORES.
NOTE 2 : If you are ordering a complete drive unit for a 2014+ pickup model you WILL need to send us your drive unit only (not complete mirror assy). Please email us for the shipping address - paul@gruvenparts.com
NOTE 3 : *** You Cannot Just Install a Metal Gear Without Also Changing The Motor To The GruvenParts INTERNALLY GROUNDED MOTOR ! You Will Short Out the Body Control Module. All Of Our Kits Come With New Motors Which Are Internally Grounded and Work With Metal Gears - So Don't Just Replace the Gear, You Must Replace Both Gear AND Motor When Going to Metal !!! ***
NOTE 4 : *** THESE ARE NOT FOR TOWING MIRRORS - PLEASE CLICK HERE FOR TOWING MIRRORS PRODUCT PAGE ****
DIY Library - Please Select Appropriate DIY for your Vehicle (Non Towing Mirrors!)
2007-2013 GM Silverado, Sierra, Tahoe, Suburban + 2014 Tahoe/Suburban
2014-2018 Sierra/Silverado
2015-2019 Tahoe/Suburban
Please visit this product page
Traverse/Acadia/Outlook - All Years Supplemental Instructions
** 2 Options Are Available ***
Note that if you chose Option 2, you will either need to send in your unit for repair directly, or wait approximately 2 months for us to get a unit to repair. These are becoming hard to find and people arent returning their cores as often anymore for some reason. We can usually repair sent in units same day to minimize down time as you cant install the mirror without the drive unit in place.
Option 1:
Buy strengthened steel gears machined integral to the main spiral shaft + hi-torque motor in quantity 1 set for 1 mirror or 2 sets for 2 mirrors ($64.99 / $99.99).
Option 2:
Buy a rebuilt complete motor drive unit with new hi-torque motor + steel integral gear already installed and tested ($229.99 minus $30 core return = $199.99). Please note when buying the complete drive unit, you must choose passenger side or drivers side, and there is a $30 core refund so be sure to send back your old assembly in repairable condition. Core returns are only applicable to complete drive units and when you are ready to return your core, please email paul@gruvenparts.com for instructions. Your CORE must be rebuildable. We cannot accept units which have parts other than the motor/spur gear broken as cores as we would have no way to rebuild them.
***** PLEASE NOTE WHEN ORDERING THE COMPLETE DRIVE UNIT - If you are in a hurry for this, its best to check with us to see if we have any cores. It could be 4-6 weeks to receive this, based on how many units we have in the shop. People do not send back their cores very quickly, so we are usually waiting. You can send in your own unit to be worked as well, and we will apply the $30 core when you send in and try to work it same day or very quick.
Other Parts Available :
We also carry a limited number of used parts to service these mirrors in case you loose or break something. We have some of everything, so just email paul@gruvenparts.com if you need something. We do now have some used mirror glass drive units for both sides - these are the little motorized units that actually adjust the angle of the mirror glass.
** Product Description **
GruvenParts.com is pleased to announce replacement strengthened STEEL gears and high torque INTERNALLY GROUNDED motors (OEM MOTOR WONT WORK WITH METAL) for the power folding mirrors on most 2007-Present GM trucks including Acadia, Traverse, Enclave, Escalade, Silverado, Avalanche, Tahoe, Suburban, Sierra, Yukon, and Denali. Also fits ALL 2007-Present GMC pick-up trucks. As many have discovered, the folding mirror assembly on these trucks suffers from a thin, weak, plastic spur gear mounted to the main drive shaft. The plastic spur gear cracks at the slightest impact or just wears out over time causing an inoperable folding mirror. The GM motors also get weak and die quickly. Unfortunately, GM will only sell you a complete folding mirror assembly, which will cost you from $700-$1,200 ea after labor and paint, depending on the year/make/model. And that $ would be wasted on another mirror assembly with another weak, plastic spur gear and weak electric motor that will also soon fail. Don't waste time or hard earned money on more GM parts that will also soon fail!
GruvenParts.com has addressed this issue by designing a strengthened integral spiral spur/worm gear shaft made from high strength steel to eliminate the fatigue cracking in the GM plastic gear. We have also designed a replacement high torque electric motor to accompany this new metal gear. Our new electric motor is required when switching out to the metal gear, as the ground circuit in the OEM motor does not allow for a metal gear to be installed. You can chose to buy the gear/motor combo for one or both sides or you can buy complete drive units which are rebuilt and already have the new metal gears and hi torque motor installed in them.
We have thoroughly tested our redesigned integral gear and high torque motor using a new, OEM mirror assembly and computerized test equipment. Our test samples barely showed any wear whatsoever, and the testing did include random wacks against the mirror, jamming the mirror operation as it was folding, and manually stressing the mechanism all in an attempt the break the gear. Each sample was tested more than 5,000 open/close cycles and was still going strong at that point !
This product carries a LIFETIME WARRANTY! Provided you don't burn the vehicle, or otherwise smash the mirror into something, you can send back the motor drive unit to us and we'll replace the gear assembly and get it working again free of charge. You would only be responsible for shipping under this warranty.
** Application **
Gears and Motors Fit Both Passenger and Drivers Side Power Folding Mirrors.
All 2007-Present GM Pick Up Trucks Including all Silverado and Sierra with Non-Towing Power Fold Mirrors -- please note the 2014+ pick up trucks used different plastics on the frame, so disassembly of the mirror frame doesnt match the previous gen DIY. The lower half of the drive unit with all the gears inside IS the same as the previous generation.
All 2007-2014 GM SUV's With Power Folding Non-Tow Mirrors Including Acadia, Traverse, Enclave, Escalade, Tahoe, Suburban, Yukon, and Denali.
This includes (but not limited to) the following mirror assembly part numbers :
25-83-12-36 (25831236), 25-77-98-49 (25779849)
This list of part numbers will continually grow as we build the interchange list. This is in no way complete, as most GM trucks made from 2007-2014 with power folding mirrors will use this gear. If your power folding mirror looks like the mirror shown in the DIY, this gear will fit your vehicle.
... We also have many more products for GM, including the towing mirror gears, 2015-Present SUV non-towing mirror gears, door lock motors, door handle inserts ! Check out the GM section of our website!
Previous | Showing reviews 321-330 of 637 | Next
Posted by George Ilbery on 21st Jan 2020
I installed the kit, 2 gears & 2 motors, the same afternoon I received them. I had watched the installation video before ordering them and double checked a couple of things during the install. They both worked great. The passenger side was broke when we bought our suburban & I didn't normally use them because of that. I accidentally hit the fold button the other day & the drivers mirror broke in a bad angle. Time for repairs. Now I use them regularly due to the size of our vehicle taking up most of the sparing space. Thanks for making a repair available & affordable. Wish I'd done it earlier.
Posted by Royston Spencer on 8th Jan 2020
Excellent gear set. Ordered sets for both sides. Did the drivers side as the passenger side still works with the old gears. Followed the instructions on the web site. A little daunting to do but everything came apart the way the instructions said. The mirror now works better than the original passenger side one. I will be changing that one in the spring. I used three or four rubber bands to keep the mirror in place instead of tape and that worked great.
Posted by Derek L on 6th Jan 2020
Purchased the gear and motor combo. The gear is clearly superior to the OEM plastic component, as expected. I am most impressed with the detailed YouTube video showing how to install it. I never would have made it through the process without it.
Posted by Steven on 5th Jan 2020
I bought the full kit of both gears/motors. They fit perfectly and perform well. I feel confident that they will last the life of the truck.
Posted by Ed on 5th Jan 2020
Part fits helpful in line diagrams and pictures with instructions.
Posted by Tim Rhoton on 4th Jan 2020
I live in a high altitude area of Arizona and it is presently very cold and snowy outside. I have not yet tried to replace the mirror parts and probably will not until the weather warms up. I do not want to take a chance on breaking the plastic parts around the mirror due to the cold temps. I have received the mirror parts, they look solid and hopefully I can accomplish putting them in and getting my mirrors functioning again. Thanks for making a replacement part that will last and also the how to VIDEO to refer to. This is much preferred over taking to a dealer for high $$$ rip. THANKS
-- response --
Thanks Tim. You can heat up the plastic mirror assembly with a hair dryer to make it softer if you dont want to wait. But I understand its not fun working on a car in freezing temps! Hopefully warms up soon, its a beautiful area out there !
Posted by Jim Hanson on 2nd Jan 2020
Great product. Install video is makes installation easy for the DIY'r. Two notes; the grease is a white lithium grease available at your auto parts store, and if mirror spins and does not stop, the base was not installed properly, test a couple times for correct movement prior to installing spring.
-- response ==
Thanks Jim. As you pointed out, if the mirror spins 180, it means the collet is not seated correctly. Please double check the DIY instructions on the collet positioning. It will only fully seat 1 way, and it must be fully seated for the mirror stops to function properly.
Posted by Darren Misar on 31st Dec 2019
This part was a high-quality, perfect fit. Together with the installation video this made my life very easy. So happy to have my mirrors functioning again like new.
Posted by Lou on 29th Dec 2019
Just replaced my power folding motor and gears for my 08 Avalanche. What a great design!!! This is how it should have been stock from the company, but you know that would never happen. The instructional video was all the help I needed, took it apart, replaced the gear and motor then reassembled everything in about 2 hrs. I bought 2 sets, going to replace the 2nd set when the weather warms up.
Posted by Unknown on 17th Dec 2019
This is a top notch solution to an aggravating problem. These folks have everything from a quality replacement part to a fabulous step by step video to fix it. My problem was not part related - it was getting that damn mirror piece to "pop" out. Took a lot because I did not want to risk breaking the frame. Eventually it did come out and the rest was following the instructions. Since the video did not mention it, I used a 1" 12 point socket to use to take the spring off. Other than that, I would buy Gruvenparts again. I bought two motors and will do the passenger side in the Spring when it gets warmer. Thanks, guys for making this happen.
-- Response --
OK thanks for the review and appreciate the tip on the 1" socket. Some have used a 12" length of 1" PVC pipe and just lean on the unit in the field to compress and turn the spring. If you do this, go ahead and wire tie the spring coils so it cant fly out. And as always WEAR EYE PROTECTION.
Paul@GruvenParts.com
ABOUT SSL CERTIFICATES |