null
  Loading... Please wait...
  • GruvenParts Replacement High Torque Motors and Strengthened Brass Spur Gears Pre-Mounted to New Steel Main Shafts for GM Vehicles with Power Folding Mirrors.  2 Sets Shown (enough for both mirrors)
  • GruvenParts Complete Motor Drive Units.  Rebuilt unit comes with Strengthened Brass Spur Gear and Hi-Torque Motor Preinstalled and Tested !

GruvenParts.com Strengthened Spur Gear for 2007+ GM Trucks Folding Mirror Assembly

$64.99
Weight:
0.50 LBS
Rating:
Quantity:


Product Description

HIGH STRENGTH STEEL GEARS ... BECAUSE PLASTIC GEARS BREAK - That's Why You Are On This Page To Begin With !!!!

 

**** NEED SPARE POWER FOLDING NON-TOW MIRROR PARTS ? PLEASE CLICK HERE FOR THE SPARE PARTS PAGE ****

 

NOTE : IF YOU ARE ORDERING A COMPLETE DRIVE UNIT ($229.99) PLEASE CHECK WITH US TO ENSURE AVAILABILITY OF CORES.

NOTE 2 : If you are ordering a complete drive unit for a 2014+ pickup model you WILL need to send us your drive unit only (not complete mirror assy). Please email us for the shipping address - paul@gruvenparts.com

NOTE 3 : *** You Cannot Just Install a Metal Gear Without Also Changing The Motor To The GruvenParts INTERNALLY GROUNDED MOTOR !  You Will Short Out the Body Control Module.  All Of Our Kits Come With New Motors Which Are Internally Grounded and Work With Metal Gears - So Don't Just Replace the Gear, You Must Replace Both Gear AND Motor When Going to Metal !!! ***

NOTE 4 : *** THESE ARE NOT FOR TOWING MIRRORS  - PLEASE CLICK HERE FOR TOWING MIRRORS PRODUCT PAGE ****

 

DIY Library - Please Select Appropriate DIY for your Vehicle (Non Towing Mirrors!)

 

2007-2013 GM Silverado, Sierra, Tahoe, Suburban + 2014 Tahoe/Suburban

Video 

PDF

Webpage

 

2014-2018 Sierra/Silverado

PDF

 

2015-2019 Tahoe/Suburban

Please visit this product page

 

Traverse/Acadia/Outlook - All Years Supplemental Instructions

Webpage

 

 

** 2 Options Are Available ***

Note that if you chose Option 2, you will either need to send in your unit for repair directly, or wait approximately 2 months for us to get a unit to repair.  These are becoming hard to find and people arent returning their cores as often anymore for some reason.  We can usually repair sent in units same day to minimize down time as you cant install the mirror without the drive unit in place.

Option 1: 

Buy strengthened steel gears machined integral to the main spiral shaft + hi-torque motor in quantity 1 set for 1 mirror or 2 sets for 2 mirrors ($64.99 / $99.99).  

Option 2:

Buy a rebuilt complete motor drive unit with new hi-torque motor + steel integral gear already installed and tested ($229.99 minus $30 core return = $199.99).  Please note when buying the complete drive unit, you must choose passenger side or drivers side, and there is a $30 core refund so be sure to send back your old assembly in repairable condition.  Core returns are only applicable to complete drive units and when you are ready to return your core, please email paul@gruvenparts.com for instructions.  Your CORE must be rebuildable.  We cannot accept units which have parts other than the motor/spur gear broken as cores as we would have no way to rebuild them.

***** PLEASE NOTE WHEN ORDERING THE COMPLETE DRIVE UNIT - If you are in a hurry for this, its best to check with us to see if we have any cores.  It could be 4-6 weeks to receive this, based on how many units we have in the shop.  People do not send back their cores very quickly, so we are usually waiting.  You can send in your own unit to be worked as well, and we will apply the $30 core when you send in and try to work it same day or very quick.  

 

Other Parts Available :

We also carry a limited number of used parts to service these mirrors in case you loose or break something.  We have some of everything, so just email paul@gruvenparts.com if you need something.  We do now have some used mirror glass drive units for both sides - these are the little motorized units that actually adjust the angle of the mirror glass.

  

** Product Description **

GruvenParts.com is pleased to announce replacement strengthened STEEL gears and high torque INTERNALLY GROUNDED motors (OEM MOTOR WONT WORK WITH METAL) for the power folding mirrors on most 2007-Present GM trucks including Acadia, Traverse, Enclave, Escalade, Silverado, Avalanche, Tahoe, Suburban, Sierra, Yukon, and Denali.  Also fits ALL 2007-Present GMC pick-up trucks. As many have discovered, the folding mirror assembly on these trucks suffers from a thin, weak, plastic spur gear mounted to the main drive shaft.  The plastic spur gear cracks at the slightest impact or just wears out over time causing an inoperable folding mirror.  The GM motors also get weak and die quickly. Unfortunately, GM will only sell you a complete folding mirror assembly, which will cost you from $700-$1,200 ea after labor and paint, depending on the year/make/model.  And that $ would be wasted on another mirror assembly with another weak, plastic spur gear and weak electric motor that will also soon fail.  Don't waste time or hard earned money on more GM parts that will also soon fail!  

GruvenParts.com has addressed this issue by designing a strengthened integral spiral spur/worm gear shaft made from high strength steel to eliminate the fatigue cracking in the GM plastic gear. We have also designed a replacement high torque electric motor to accompany this new metal gear. Our new electric motor is required when switching out to the metal gear, as the ground circuit in the OEM motor does not allow for a metal gear to be installed. You can chose to buy the gear/motor combo for one or both sides or you can buy complete drive units which are rebuilt and already have the new metal gears and hi torque motor installed in them.  

We have thoroughly tested our redesigned integral gear and high torque motor using a new, OEM mirror assembly and computerized test equipment.  Our test samples barely showed any wear whatsoever, and the testing did include random wacks against the mirror, jamming the mirror operation as it was folding, and manually stressing the mechanism all in an attempt the break the gear.  Each sample was tested more than 5,000 open/close cycles and was still going strong at that point !  

This product carries a LIFETIME WARRANTY!  Provided you don't burn the vehicle, or otherwise smash the mirror into something, you can send back the motor drive unit to us and we'll replace the gear assembly and get it working again free of charge.  You would only be responsible for shipping under this warranty.

 

** Application ** 

Gears and Motors Fit Both Passenger and Drivers Side Power Folding Mirrors.  

All 2007-Present GM Pick Up Trucks Including all Silverado and Sierra with Non-Towing Power Fold Mirrors -- please note the 2014+ pick up trucks used different plastics on the frame, so disassembly of the mirror frame doesnt match the previous gen DIY.  The lower half of the drive unit with all the gears inside IS the same as the previous generation.

All 2007-2014 GM SUV's With Power Folding Non-Tow Mirrors Including Acadia, Traverse, Enclave, Escalade, Tahoe, Suburban, Yukon, and Denali. 

This includes (but not limited to) the following mirror assembly part numbers :

25-83-12-36 (25831236), 25-77-98-49 (25779849)

This list of part numbers will continually grow as we build the interchange list.  This is in no way complete, as most GM trucks made from 2007-2014 with power folding mirrors will use this gear.  If your power folding mirror looks like the mirror shown in the DIY, this gear will fit your vehicle.

 

... We also have many more products for GM, including the towing mirror gears, 2015-Present SUV non-towing mirror gears, door lock motors, door handle inserts !  Check out the GM section of our website!

 

Product Reviews

Previous | Showing reviews 301-310 of 637 | Next

  1. Great Motor and Gear 4 Star Review

    Posted by on 5th May 2020

    I should have read instructions before I put gear on. I didn’t realize I needed JB weld for this year; however it worked great afterwards. As a matter of fact, the new motor moves faster than my old one. I may need to change the other one too.


  2. Mirror's operational again -- back to the automatic car wash 5 Star Review

    Posted by on 3rd May 2020

    The product delivered as promised. The instructional video provided online was very important to me and easy to follow. Repaired both mirrors by replacing both the gear and motor. After disassembly discovered indeed the original plastic gears were damaged.


  3. great product 5 Star Review

    Posted by on 1st May 2020

    Great product and fast shipping


  4. WORKED PERFECT 5 Star Review

    Posted by on 30th Apr 2020

    Super happy with this fix! Took me about an hour to do, but when I have to do the dr side should be a lot quicker. Great step by step instructions, and .After reassembling the case i plugged in the 12v motor to make sure it all worked before final assembly, and it worked like a champ. The only problem I have now is the dr side lags WAY behind now, guess I need to get that side done next, thanks!!


  5. Quality Replacement Full Motor and Gear Unit 5 Star Review

    Posted by on 29th Apr 2020

    2013 GMC Yukon mirror gear broke. Didn't want to pay for the $500-$700 dollar full replacement mirror. Found Gruvenparts.com by doing a Google search. I bought the full replacement unit for $229. Sending my core back for a $30 core refund. The new motor/gear works great! Very trustworthy group and they have quick shipping!


  6. Excellent fitment 5 Star Review

    Posted by on 28th Apr 2020

    Love the repair parts and instructional video available. Being in the business for over 30 years I was/am curious about the reasoning behind every step and instruction in the video, a few times, for example being told to grind off two tabs on a pivoting plate peaked my interest as to (why) so I took a bit longer to install and repair the mirror.... by the way... genius on there part, I figured out why they were instructed to be ground off, it is so that if/when someone in a parking lot manually slams your mirror in it will not break or strip your new precious gears you just installed.


  7. 2008 GMC Sierra 1500 Mirror motor/gear replacement 5 Star Review

    Posted by on 28th Apr 2020

    Very happy with these parts. Shipped quickly and foc. Followed the instructions from the excellent installation video and had no problems or surprises. Take your time, follow the video and you'll save a ton of money. Oh, and use WD40 on the electrical connections if you have trouble pulling them apart.


  8. GruvenPart Video made Installation Easy! 5 Star Review

    Posted by on 28th Apr 2020

    I was very satisfied with my installation results. I purchased the spiral/pinion gear assembly and DC motor parts. The parts came quickly(could have been better packaged from possible damage). I watched the impeccably detailed video three times and then used it to step me through the process. I went step by step. Mirror works perfectly. I am very satisfied and feel that I likely saved myself $400+ had I taken it in to be serviced.


  9. works so far 5 Star Review

    Posted by on 26th Apr 2020

    Would use again


  10. Ask yourself how much you want your mirrors to work 5 Star Review

    Posted by on 22nd Apr 2020

    Bought my 2011 Denalj used with broken power fold mirrors. Finally got tired of having to manually fold in at the carwash or to park in tight garages. Long story short this is not a fun project but momma didn't raise a quitter. The first mirror took me 2 hours because the dowels were jammed. The second worst part was separation of the first motor case. Honestly the easiest hard part was the spring retainer ring. I used a piece of 1 inch PVC with the mirror base on the ground. Just pump it up and down while rotating the pipe slightly until it releases. Same for reinstall. The second mirror was a breeze though. Great solution to an unnecessary problem. 0/10 want to do it again though Lol


Previous | Showing reviews 301-310 of 637 | Next



Find Your Part

Recent Updates

Newsletter Sign Up




ABOUT SSL CERTIFICATES