Loading... Please wait...HIGH STRENGTH STEEL GEARS ... BECAUSE PLASTIC GEARS BREAK - That's Why You Are On This Page To Begin With !!!!
**** NEED SPARE POWER FOLDING NON-TOW MIRROR PARTS ? PLEASE CLICK HERE FOR THE SPARE PARTS PAGE ****
NOTE : IF YOU ARE ORDERING A COMPLETE DRIVE UNIT ($229.99) PLEASE CHECK WITH US TO ENSURE AVAILABILITY OF CORES.
NOTE 2 : If you are ordering a complete drive unit for a 2014+ pickup model you WILL need to send us your drive unit only (not complete mirror assy). Please email us for the shipping address - paul@gruvenparts.com
NOTE 3 : *** You Cannot Just Install a Metal Gear Without Also Changing The Motor To The GruvenParts INTERNALLY GROUNDED MOTOR ! You Will Short Out the Body Control Module. All Of Our Kits Come With New Motors Which Are Internally Grounded and Work With Metal Gears - So Don't Just Replace the Gear, You Must Replace Both Gear AND Motor When Going to Metal !!! ***
NOTE 4 : *** THESE ARE NOT FOR TOWING MIRRORS - PLEASE CLICK HERE FOR TOWING MIRRORS PRODUCT PAGE ****
DIY Library - Please Select Appropriate DIY for your Vehicle (Non Towing Mirrors!)
2007-2013 GM Silverado, Sierra, Tahoe, Suburban + 2014 Tahoe/Suburban
2014-2018 Sierra/Silverado
2015-2019 Tahoe/Suburban
Please visit this product page
Traverse/Acadia/Outlook - All Years Supplemental Instructions
** 2 Options Are Available ***
Note that if you chose Option 2, you will either need to send in your unit for repair directly, or wait approximately 2 months for us to get a unit to repair. These are becoming hard to find and people arent returning their cores as often anymore for some reason. We can usually repair sent in units same day to minimize down time as you cant install the mirror without the drive unit in place.
Option 1:
Buy strengthened steel gears machined integral to the main spiral shaft + hi-torque motor in quantity 1 set for 1 mirror or 2 sets for 2 mirrors ($64.99 / $99.99).
Option 2:
Buy a rebuilt complete motor drive unit with new hi-torque motor + steel integral gear already installed and tested ($229.99 minus $30 core return = $199.99). Please note when buying the complete drive unit, you must choose passenger side or drivers side, and there is a $30 core refund so be sure to send back your old assembly in repairable condition. Core returns are only applicable to complete drive units and when you are ready to return your core, please email paul@gruvenparts.com for instructions. Your CORE must be rebuildable. We cannot accept units which have parts other than the motor/spur gear broken as cores as we would have no way to rebuild them.
***** PLEASE NOTE WHEN ORDERING THE COMPLETE DRIVE UNIT - If you are in a hurry for this, its best to check with us to see if we have any cores. It could be 4-6 weeks to receive this, based on how many units we have in the shop. People do not send back their cores very quickly, so we are usually waiting. You can send in your own unit to be worked as well, and we will apply the $30 core when you send in and try to work it same day or very quick.
Other Parts Available :
We also carry a limited number of used parts to service these mirrors in case you loose or break something. We have some of everything, so just email paul@gruvenparts.com if you need something. We do now have some used mirror glass drive units for both sides - these are the little motorized units that actually adjust the angle of the mirror glass.
** Product Description **
GruvenParts.com is pleased to announce replacement strengthened STEEL gears and high torque INTERNALLY GROUNDED motors (OEM MOTOR WONT WORK WITH METAL) for the power folding mirrors on most 2007-Present GM trucks including Acadia, Traverse, Enclave, Escalade, Silverado, Avalanche, Tahoe, Suburban, Sierra, Yukon, and Denali. Also fits ALL 2007-Present GMC pick-up trucks. As many have discovered, the folding mirror assembly on these trucks suffers from a thin, weak, plastic spur gear mounted to the main drive shaft. The plastic spur gear cracks at the slightest impact or just wears out over time causing an inoperable folding mirror. The GM motors also get weak and die quickly. Unfortunately, GM will only sell you a complete folding mirror assembly, which will cost you from $700-$1,200 ea after labor and paint, depending on the year/make/model. And that $ would be wasted on another mirror assembly with another weak, plastic spur gear and weak electric motor that will also soon fail. Don't waste time or hard earned money on more GM parts that will also soon fail!
GruvenParts.com has addressed this issue by designing a strengthened integral spiral spur/worm gear shaft made from high strength steel to eliminate the fatigue cracking in the GM plastic gear. We have also designed a replacement high torque electric motor to accompany this new metal gear. Our new electric motor is required when switching out to the metal gear, as the ground circuit in the OEM motor does not allow for a metal gear to be installed. You can chose to buy the gear/motor combo for one or both sides or you can buy complete drive units which are rebuilt and already have the new metal gears and hi torque motor installed in them.
We have thoroughly tested our redesigned integral gear and high torque motor using a new, OEM mirror assembly and computerized test equipment. Our test samples barely showed any wear whatsoever, and the testing did include random wacks against the mirror, jamming the mirror operation as it was folding, and manually stressing the mechanism all in an attempt the break the gear. Each sample was tested more than 5,000 open/close cycles and was still going strong at that point !
This product carries a LIFETIME WARRANTY! Provided you don't burn the vehicle, or otherwise smash the mirror into something, you can send back the motor drive unit to us and we'll replace the gear assembly and get it working again free of charge. You would only be responsible for shipping under this warranty.
** Application **
Gears and Motors Fit Both Passenger and Drivers Side Power Folding Mirrors.
All 2007-Present GM Pick Up Trucks Including all Silverado and Sierra with Non-Towing Power Fold Mirrors -- please note the 2014+ pick up trucks used different plastics on the frame, so disassembly of the mirror frame doesnt match the previous gen DIY. The lower half of the drive unit with all the gears inside IS the same as the previous generation.
All 2007-2014 GM SUV's With Power Folding Non-Tow Mirrors Including Acadia, Traverse, Enclave, Escalade, Tahoe, Suburban, Yukon, and Denali.
This includes (but not limited to) the following mirror assembly part numbers :
25-83-12-36 (25831236), 25-77-98-49 (25779849)
This list of part numbers will continually grow as we build the interchange list. This is in no way complete, as most GM trucks made from 2007-2014 with power folding mirrors will use this gear. If your power folding mirror looks like the mirror shown in the DIY, this gear will fit your vehicle.
... We also have many more products for GM, including the towing mirror gears, 2015-Present SUV non-towing mirror gears, door lock motors, door handle inserts ! Check out the GM section of our website!
Previous | Showing reviews 431-440 of 637 | Next
Posted by Unknown on 19th Feb 2019
These motors and gears are what GM should have put in their folding mirrors in the first place. Factory plastic gears were in pieces. Installation was pretty painless and the mirrors fold much quicker and quieter than with the original equipment parts. These motors and gears are a great value and I highly recommend them. I bought two so I would not have to deal with nonfunctional mirrors in the future.
Posted by kenwilliams44@gmail.com on 18th Feb 2019
This is the best product i have ordered, I was searching for a while before I came across your web site. The parts came in very quick. I replaced the motors and gears in about two hours. The mirrors fold in and out even quicker than before. Cadillac needs your help!!! In fact I told my neighbor about the replacement gears an he ordered them also. Awesome product!
Thanks,
Kenny Williams
Posted by Unknown on 17th Feb 2019
Buy 2 and replace both plastic gears. They will both fail eventually, and the replacement job is easy. Use a jack handle to compress the spring easily.
Posted by Jim w/ Croghan AutoCare Wilmington, Ohio on 15th Feb 2019
These kits are a fantastic way to fix a poor design once and for all. Quality parts, excellent step by step instructions. If you have some basic mechanical skills and can follow instructions, you can fix your own mirrors. If not, recommend this product to your local independent mechanic. I agree with the other reviewers in that you should buy two, not just one. The folding speed is much greater with the new motors.
Posted by Dan D on 4th Dec 2018
I only bought one, as I wanted to make sure I could do it. Used a socket and the palm of my hand for the spring retainer, instead of my hydraulic press or drill press. 1 hour start to finish. I bet other side gets done in 30 min. And I would say get both sides, because it’s not if but when it will fail, and the new motor swings mirror faster than the oem one. Might drive the ocd guys nuts...
Posted by Don V. on 31st Oct 2018
I purchased the pre-attached gear and motor. The instructions that I downloaded from the website were very good. It took a bit of time to accomplish but is doable for anyone with some mechanical aptitude. Removing the spring and re-installing the spring is most challenging part of this repair. A vise and a large socket helps in this regard. Once the repair was completed the mirror worked fine.
-- response --
Thanks Don. One thing we have found is for "field" repairs where perhaps a vice or arbor press is not available, some have used 1" PVC pipe to lean on the spring retainer and compress the spring while turning it 1/6 turn. For anyone who does this, please wire tie the spring coils BEFORE using this field method and make sure to wear eye protection. We dont want the heavy spring to go flying if you slip off the retainer when compressing by hand. The PVC pipe seems to grip the retainer better than a metallic socket or spacer.
Posted by E on 9th Oct 2018
I purchased the pre-mounted gear & motor and they worked like a champ.
The PDF instructions were easy to follow, however I questioned grinding off the tabs, but did it anyway since I did not want to have any problems where I would have to dissemble the mirrors again. In all after a few hours doing both mirrors it was well worth the money and time to install this quality product. I hope they last a very long time.
Posted by Diana Sanchez on 8th Oct 2018
I'm a female that was able to completely do this on my own. I had several doubts but with the instructions everything worked out great. Parts are worth purchasing when you compare it to GMC original plastic piece!
Posted by Barry Proctor on 1st Oct 2018
After I read the installation instructions CAREFULLY the installation went off without a hitch. The hardest part was removing and reinstalling the spring retainer which wasn't that difficult since I had the correct tools to work with. Everything else was a piece of cake. I chose Option 2 and the materials were of very high quality and the workmanship was perfect. If the other mirror gear goes out I'll definitely order another one.
Posted by Unknown on 24th Sep 2018
Thanks to Gruven for making the REAL parts to go the lifetime
ABOUT SSL CERTIFICATES |