Loading... Please wait...HIGH STRENGTH STEEL GEARS ... BECAUSE PLASTIC GEARS BREAK - That's Why You Are On This Page To Begin With !!!!
**** NEED SPARE POWER FOLDING NON-TOW MIRROR PARTS ? PLEASE CLICK HERE FOR THE SPARE PARTS PAGE ****
NOTE : IF YOU ARE ORDERING A COMPLETE DRIVE UNIT ($229.99) PLEASE CHECK WITH US TO ENSURE AVAILABILITY OF CORES.
NOTE 2 : If you are ordering a complete drive unit for a 2014+ pickup model you WILL need to send us your drive unit only (not complete mirror assy). Please email us for the shipping address - paul@gruvenparts.com
NOTE 3 : *** You Cannot Just Install a Metal Gear Without Also Changing The Motor To The GruvenParts INTERNALLY GROUNDED MOTOR ! You Will Short Out the Body Control Module. All Of Our Kits Come With New Motors Which Are Internally Grounded and Work With Metal Gears - So Don't Just Replace the Gear, You Must Replace Both Gear AND Motor When Going to Metal !!! ***
NOTE 4 : *** THESE ARE NOT FOR TOWING MIRRORS - PLEASE CLICK HERE FOR TOWING MIRRORS PRODUCT PAGE ****
DIY Library - Please Select Appropriate DIY for your Vehicle (Non Towing Mirrors!)
2007-2013 GM Silverado, Sierra, Tahoe, Suburban + 2014 Tahoe/Suburban
2014-2018 Sierra/Silverado
2015-2019 Tahoe/Suburban
Please visit this product page
Traverse/Acadia/Outlook - All Years Supplemental Instructions
** 2 Options Are Available ***
Note that if you chose Option 2, you will either need to send in your unit for repair directly, or wait approximately 2 months for us to get a unit to repair. These are becoming hard to find and people arent returning their cores as often anymore for some reason. We can usually repair sent in units same day to minimize down time as you cant install the mirror without the drive unit in place.
Option 1:
Buy strengthened steel gears machined integral to the main spiral shaft + hi-torque motor in quantity 1 set for 1 mirror or 2 sets for 2 mirrors ($64.99 / $99.99).
Option 2:
Buy a rebuilt complete motor drive unit with new hi-torque motor + steel integral gear already installed and tested ($229.99 minus $30 core return = $199.99). Please note when buying the complete drive unit, you must choose passenger side or drivers side, and there is a $30 core refund so be sure to send back your old assembly in repairable condition. Core returns are only applicable to complete drive units and when you are ready to return your core, please email paul@gruvenparts.com for instructions. Your CORE must be rebuildable. We cannot accept units which have parts other than the motor/spur gear broken as cores as we would have no way to rebuild them.
***** PLEASE NOTE WHEN ORDERING THE COMPLETE DRIVE UNIT - If you are in a hurry for this, its best to check with us to see if we have any cores. It could be 4-6 weeks to receive this, based on how many units we have in the shop. People do not send back their cores very quickly, so we are usually waiting. You can send in your own unit to be worked as well, and we will apply the $30 core when you send in and try to work it same day or very quick.
Other Parts Available :
We also carry a limited number of used parts to service these mirrors in case you loose or break something. We have some of everything, so just email paul@gruvenparts.com if you need something. We do now have some used mirror glass drive units for both sides - these are the little motorized units that actually adjust the angle of the mirror glass.
** Product Description **
GruvenParts.com is pleased to announce replacement strengthened STEEL gears and high torque INTERNALLY GROUNDED motors (OEM MOTOR WONT WORK WITH METAL) for the power folding mirrors on most 2007-Present GM trucks including Acadia, Traverse, Enclave, Escalade, Silverado, Avalanche, Tahoe, Suburban, Sierra, Yukon, and Denali. Also fits ALL 2007-Present GMC pick-up trucks. As many have discovered, the folding mirror assembly on these trucks suffers from a thin, weak, plastic spur gear mounted to the main drive shaft. The plastic spur gear cracks at the slightest impact or just wears out over time causing an inoperable folding mirror. The GM motors also get weak and die quickly. Unfortunately, GM will only sell you a complete folding mirror assembly, which will cost you from $700-$1,200 ea after labor and paint, depending on the year/make/model. And that $ would be wasted on another mirror assembly with another weak, plastic spur gear and weak electric motor that will also soon fail. Don't waste time or hard earned money on more GM parts that will also soon fail!
GruvenParts.com has addressed this issue by designing a strengthened integral spiral spur/worm gear shaft made from high strength steel to eliminate the fatigue cracking in the GM plastic gear. We have also designed a replacement high torque electric motor to accompany this new metal gear. Our new electric motor is required when switching out to the metal gear, as the ground circuit in the OEM motor does not allow for a metal gear to be installed. You can chose to buy the gear/motor combo for one or both sides or you can buy complete drive units which are rebuilt and already have the new metal gears and hi torque motor installed in them.
We have thoroughly tested our redesigned integral gear and high torque motor using a new, OEM mirror assembly and computerized test equipment. Our test samples barely showed any wear whatsoever, and the testing did include random wacks against the mirror, jamming the mirror operation as it was folding, and manually stressing the mechanism all in an attempt the break the gear. Each sample was tested more than 5,000 open/close cycles and was still going strong at that point !
This product carries a LIFETIME WARRANTY! Provided you don't burn the vehicle, or otherwise smash the mirror into something, you can send back the motor drive unit to us and we'll replace the gear assembly and get it working again free of charge. You would only be responsible for shipping under this warranty.
** Application **
Gears and Motors Fit Both Passenger and Drivers Side Power Folding Mirrors.
All 2007-Present GM Pick Up Trucks Including all Silverado and Sierra with Non-Towing Power Fold Mirrors -- please note the 2014+ pick up trucks used different plastics on the frame, so disassembly of the mirror frame doesnt match the previous gen DIY. The lower half of the drive unit with all the gears inside IS the same as the previous generation.
All 2007-2014 GM SUV's With Power Folding Non-Tow Mirrors Including Acadia, Traverse, Enclave, Escalade, Tahoe, Suburban, Yukon, and Denali.
This includes (but not limited to) the following mirror assembly part numbers :
25-83-12-36 (25831236), 25-77-98-49 (25779849)
This list of part numbers will continually grow as we build the interchange list. This is in no way complete, as most GM trucks made from 2007-2014 with power folding mirrors will use this gear. If your power folding mirror looks like the mirror shown in the DIY, this gear will fit your vehicle.
... We also have many more products for GM, including the towing mirror gears, 2015-Present SUV non-towing mirror gears, door lock motors, door handle inserts ! Check out the GM section of our website!
Previous | Showing reviews 421-430 of 637 | Next
Posted by Thomas Dunlap on 19th Mar 2019
Paul Gruven is a brilliant caring craftsman.
It was a pleasure doing business with Paul.
I was treated more than fair.
Posted by DeWayne C Griffin on 16th Mar 2019
I sides wiped a mailbox, and eventually my passenger mirror stopped folding. I did a lot of research. The dealer wanted $650 for a replacement 2011 Tahoe power folding mirror. I found Gruven, asked a few questions and eventually bought a replacement motor. The process to replace the motor is straight forward, just follow the instructions. My only problem was the heater wires, the contacts were rusted onto the mirror prongs, I had to keep working them with pliers, they finally came off. It definitely moves faster than the original drivers side mirror. I have had no issues after putting everything back together.
Awesome product!
-- Response from GruvenParts
Thanks DeWayne for the review. Regrading those heater wires, I know what you mean. If they are really rusted onto back of mirror, sometimes I clip them and resolder them. We just want to be very careful not to break the tangs off the back of the mirror. Normally and gentle up/down while pulling motion gets them to come off but if rusted solid, I would suggest clipping the wires then just resoldering. It doesnt matter the orientation as its just a DC electric heater in there so it can power in either direction.
Paul@GruvenParts.com
Posted by Angelo on 13th Mar 2019
Much stronger and more durable...the way it should have been from factory!
Posted by Dwight Allen on 9th Mar 2019
The rebuilt motor was exactly what I needed, works great and with the help of YouTube videos removing and installing was a breeze. The mirror works perfectly. The only reason for the four star rating was the 8 days to receive the motor and I thought a little expensive for a rebuilt.
Posted by Tim Carver on 3rd Mar 2019
Great bunch of people to buy from! Install, both sides, hour and a half. Hint: Clamped a 6" C- clamp vertical in vise, used appropriate sockets on top and bottom to compress and hold spring.
-- Response --
Thanks Tim. Also, you can use a short length of 1" PVC and body weight to press down on the spring retainer. Wear eye protection, and go ahead and wire tie the spring to the unit incase you slip off. This works well for "field repairs". We use a vice with tooling to compress but a length of PVC also will work fine out in the field to quickly compress and rotate and release the spring retainer.
Paul@GruvenParts.com
Posted by Unknown on 3rd Mar 2019
Drivers side mirror wouldn't fold and flopped around on my 2007 gmc yukon. Ordered these fixed the drivers side. It was really easy and instructions were perfect. Did the passenger side also because the drivers side worked so smooth and fast. Excellent product and company. Highly recommend!!
Posted by Mark S. on 27th Feb 2019
Had a learning curve on the first side (make sure the new motor is facing the right way for the electric connection), so I basically did that side twice. It took me about an hour and a half to do the second side. Once done, they work better than new.
-- Response--
Thanks Mark. We just revised the DIY article now posted in the product description, hopefully this clears up any confusion. Please let us know if there are any other suggestions to improve the DIY article.
Paul@GruvenParts.com
Posted by Unknown on 21st Feb 2019
Both of my power fold mirrors on my 2011 Silverado had broken gears in them. Mirrors floppy and not folding. Ordered these after finding them through a forum. Install is very easy with only a couple basic hand tools. Totally worth it and both of my mirrors work perfectly again.
Posted by mark on 21st Feb 2019
these work great, instructions are perfect and customer service is excellent!
Posted by Mike on 20th Feb 2019
I ordered the Gear + Motor for my 2009 Tahoe folding mirror. I installed the parts following the supplied directions and the repair was very easy. Only had difficulty removing the heater wires. Took a lot of pulling and a little WD-40 and they came off. This mirror now works better than new. Only regret was I should have ordered two sets. The other mirror moves slower and doesn't close as far. I know it's not going to last much longer.
ABOUT SSL CERTIFICATES |