Loading... Please wait...HIGH STRENGTH STEEL GEARS ... BECAUSE PLASTIC GEARS BREAK - That's Why You Are On This Page To Begin With !!!!
**** NEED SPARE POWER FOLDING NON-TOW MIRROR PARTS ? PLEASE CLICK HERE FOR THE SPARE PARTS PAGE ****
NOTE : IF YOU ARE ORDERING A COMPLETE DRIVE UNIT ($229.99) PLEASE CHECK WITH US TO ENSURE AVAILABILITY OF CORES.
NOTE 2 : If you are ordering a complete drive unit for a 2014+ pickup model you WILL need to send us your drive unit only (not complete mirror assy). Please email us for the shipping address - paul@gruvenparts.com
NOTE 3 : *** You Cannot Just Install a Metal Gear Without Also Changing The Motor To The GruvenParts INTERNALLY GROUNDED MOTOR ! You Will Short Out the Body Control Module. All Of Our Kits Come With New Motors Which Are Internally Grounded and Work With Metal Gears - So Don't Just Replace the Gear, You Must Replace Both Gear AND Motor When Going to Metal !!! ***
NOTE 4 : *** THESE ARE NOT FOR TOWING MIRRORS - PLEASE CLICK HERE FOR TOWING MIRRORS PRODUCT PAGE ****
DIY Library - Please Select Appropriate DIY for your Vehicle (Non Towing Mirrors!)
2007-2013 GM Silverado, Sierra, Tahoe, Suburban + 2014 Tahoe/Suburban
2014-2018 Sierra/Silverado
2015-2019 Tahoe/Suburban
Please visit this product page
Traverse/Acadia/Outlook - All Years Supplemental Instructions
** 2 Options Are Available ***
Note that if you chose Option 2, you will either need to send in your unit for repair directly, or wait approximately 2 months for us to get a unit to repair. These are becoming hard to find and people arent returning their cores as often anymore for some reason. We can usually repair sent in units same day to minimize down time as you cant install the mirror without the drive unit in place.
Option 1:
Buy strengthened steel gears machined integral to the main spiral shaft + hi-torque motor in quantity 1 set for 1 mirror or 2 sets for 2 mirrors ($64.99 / $99.99).
Option 2:
Buy a rebuilt complete motor drive unit with new hi-torque motor + steel integral gear already installed and tested ($229.99 minus $30 core return = $199.99). Please note when buying the complete drive unit, you must choose passenger side or drivers side, and there is a $30 core refund so be sure to send back your old assembly in repairable condition. Core returns are only applicable to complete drive units and when you are ready to return your core, please email paul@gruvenparts.com for instructions. Your CORE must be rebuildable. We cannot accept units which have parts other than the motor/spur gear broken as cores as we would have no way to rebuild them.
***** PLEASE NOTE WHEN ORDERING THE COMPLETE DRIVE UNIT - If you are in a hurry for this, its best to check with us to see if we have any cores. It could be 4-6 weeks to receive this, based on how many units we have in the shop. People do not send back their cores very quickly, so we are usually waiting. You can send in your own unit to be worked as well, and we will apply the $30 core when you send in and try to work it same day or very quick.
Other Parts Available :
We also carry a limited number of used parts to service these mirrors in case you loose or break something. We have some of everything, so just email paul@gruvenparts.com if you need something. We do now have some used mirror glass drive units for both sides - these are the little motorized units that actually adjust the angle of the mirror glass.
** Product Description **
GruvenParts.com is pleased to announce replacement strengthened STEEL gears and high torque INTERNALLY GROUNDED motors (OEM MOTOR WONT WORK WITH METAL) for the power folding mirrors on most 2007-Present GM trucks including Acadia, Traverse, Enclave, Escalade, Silverado, Avalanche, Tahoe, Suburban, Sierra, Yukon, and Denali. Also fits ALL 2007-Present GMC pick-up trucks. As many have discovered, the folding mirror assembly on these trucks suffers from a thin, weak, plastic spur gear mounted to the main drive shaft. The plastic spur gear cracks at the slightest impact or just wears out over time causing an inoperable folding mirror. The GM motors also get weak and die quickly. Unfortunately, GM will only sell you a complete folding mirror assembly, which will cost you from $700-$1,200 ea after labor and paint, depending on the year/make/model. And that $ would be wasted on another mirror assembly with another weak, plastic spur gear and weak electric motor that will also soon fail. Don't waste time or hard earned money on more GM parts that will also soon fail!
GruvenParts.com has addressed this issue by designing a strengthened integral spiral spur/worm gear shaft made from high strength steel to eliminate the fatigue cracking in the GM plastic gear. We have also designed a replacement high torque electric motor to accompany this new metal gear. Our new electric motor is required when switching out to the metal gear, as the ground circuit in the OEM motor does not allow for a metal gear to be installed. You can chose to buy the gear/motor combo for one or both sides or you can buy complete drive units which are rebuilt and already have the new metal gears and hi torque motor installed in them.
We have thoroughly tested our redesigned integral gear and high torque motor using a new, OEM mirror assembly and computerized test equipment. Our test samples barely showed any wear whatsoever, and the testing did include random wacks against the mirror, jamming the mirror operation as it was folding, and manually stressing the mechanism all in an attempt the break the gear. Each sample was tested more than 5,000 open/close cycles and was still going strong at that point !
This product carries a LIFETIME WARRANTY! Provided you don't burn the vehicle, or otherwise smash the mirror into something, you can send back the motor drive unit to us and we'll replace the gear assembly and get it working again free of charge. You would only be responsible for shipping under this warranty.
** Application **
Gears and Motors Fit Both Passenger and Drivers Side Power Folding Mirrors.
All 2007-Present GM Pick Up Trucks Including all Silverado and Sierra with Non-Towing Power Fold Mirrors -- please note the 2014+ pick up trucks used different plastics on the frame, so disassembly of the mirror frame doesnt match the previous gen DIY. The lower half of the drive unit with all the gears inside IS the same as the previous generation.
All 2007-2014 GM SUV's With Power Folding Non-Tow Mirrors Including Acadia, Traverse, Enclave, Escalade, Tahoe, Suburban, Yukon, and Denali.
This includes (but not limited to) the following mirror assembly part numbers :
25-83-12-36 (25831236), 25-77-98-49 (25779849)
This list of part numbers will continually grow as we build the interchange list. This is in no way complete, as most GM trucks made from 2007-2014 with power folding mirrors will use this gear. If your power folding mirror looks like the mirror shown in the DIY, this gear will fit your vehicle.
... We also have many more products for GM, including the towing mirror gears, 2015-Present SUV non-towing mirror gears, door lock motors, door handle inserts ! Check out the GM section of our website!
Previous | Showing reviews 401-410 of 637 | Next
Posted by Leopoldo E Michelena on 5th May 2019
Received parts fast and secure. Very good quality. Installed parts and wow the difference it made. Folds in faster than stock and is very firm. No shake in mirror like some of the other competitors have. Ive tried them so trust me. If you're looking for a good quality part and something that will leave you happy then look no further....thanks again u guys for these replacement parts.
Posted by Unknown on 4th May 2019
素晴らしいです。highquality!bestprice!
正に探し求めていた部品です。
Posted by cdave2000@yahoo.com on 30th Apr 2019
After receiving the parts, I went through the instructions online. It seemed like a daunting task, but it really wasn’t and it only took about an hour to do both mirrors. Follow the directions closely and be patient. It’s definitely worth the money and the work to install them.
Posted by Mike on 28th Apr 2019
The $99.99 2 motor 2 spur gear option allowed for a cost effective fix of both folding mirrors on my 2007 Suburban. Parts arrived in a timely fashion and installation via web printable guide was a breeze. I also feel confident that the all brass gears will provide lifetime of durable function.
Posted by Unknown on 28th Apr 2019
Excellent parts and cost effective COA for failing manufacturer engineering.
Read the DIY, the install is not quick and easy though...it will take some time and effort.
Posted by David Nelson on 27th Apr 2019
Works outstanding! Very thankful for someone fixing a total FAIL on GM's part. Thanks for providing an outstanding fix with great instructions. If you don't have patience, I recommend buying the entire unit as it would be MUCH easier. However, it was challenging and fun tearing it all apart.
Posted by Sam on 22nd Apr 2019
It is exactly as advertised. Harder to get that mirror apart than to attach it. It is quieter than the first one I bought from Gruven. They are much quicker to move in and out. They even sound sturdier. Ours gets used multiple times daily. Sam
Posted by Unknown on 13th Apr 2019
Great product. Did everything as advertised. Would have been even better if there were printed installation instructions with diagrams.Would be great if there were a printed guarantee.
Posted by Bruce R on 13th Apr 2019
Called GM Dealer and they stated they only sell new mirrors and will install.....for $930.00. My mirror has a chrome upper shroud. I purchased the entire rebuild from Gruven for about $250.00. Sounded MUCH better than GM!
Gruven had instructions at their site and the instructions were spot on. This is not the first time I used Gruven as I have 2 door lock actuators also supplied by them on this vehicle.
The newly installed mirror motor appears to be a little quicker in the fold in and fold out position compared to the original passenger mirror. NOT a complaint!!! And to top things off, Gruven puts a lifetime warranty on the unit.
Posted by Ken A. on 12th Apr 2019
I'm an old guy with severe arthritis and using the info provided on the gruvenparts website I was able to successfully replace the motors and spur gear assemblies (driver & passenger side folding mirrors) in my 2007 Silverado. The instructions were clear and accurate and both mirrors operate like new. I do not have an arbor press but used my drill press and a piece 1" PVC notched to fit the spring retainer tabs and everything worked well. The most difficult part of the entire undertaking was the actual removal of the mirrors. I think I was not being forceful enough out of fear of breaking the mirrors. Glad I decided to go this route. If I can do you can do it!!!
ABOUT SSL CERTIFICATES |