null
  Loading... Please wait...
  • GruvenParts Replacement High Torque Motors and Strengthened Brass Spur Gears Pre-Mounted to New Steel Main Shafts for GM Vehicles with Power Folding Mirrors.  2 Sets Shown (enough for both mirrors)
  • GruvenParts Complete Motor Drive Units.  Rebuilt unit comes with Strengthened Brass Spur Gear and Hi-Torque Motor Preinstalled and Tested !

GruvenParts.com Strengthened Spur Gear for 2007+ GM Trucks Folding Mirror Assembly

$64.99
Weight:
0.50 LBS
Rating:
Quantity:


Product Description

HIGH STRENGTH STEEL GEARS ... BECAUSE PLASTIC GEARS BREAK - That's Why You Are On This Page To Begin With !!!!

 

**** NEED SPARE POWER FOLDING NON-TOW MIRROR PARTS ? PLEASE CLICK HERE FOR THE SPARE PARTS PAGE ****

 

NOTE : IF YOU ARE ORDERING A COMPLETE DRIVE UNIT ($229.99) PLEASE CHECK WITH US TO ENSURE AVAILABILITY OF CORES.

NOTE 2 : If you are ordering a complete drive unit for a 2014+ pickup model you WILL need to send us your drive unit only (not complete mirror assy). Please email us for the shipping address - paul@gruvenparts.com

NOTE 3 : *** You Cannot Just Install a Metal Gear Without Also Changing The Motor To The GruvenParts INTERNALLY GROUNDED MOTOR !  You Will Short Out the Body Control Module.  All Of Our Kits Come With New Motors Which Are Internally Grounded and Work With Metal Gears - So Don't Just Replace the Gear, You Must Replace Both Gear AND Motor When Going to Metal !!! ***

NOTE 4 : *** THESE ARE NOT FOR TOWING MIRRORS  - PLEASE CLICK HERE FOR TOWING MIRRORS PRODUCT PAGE ****

 

DIY Library - Please Select Appropriate DIY for your Vehicle (Non Towing Mirrors!)

 

2007-2013 GM Silverado, Sierra, Tahoe, Suburban + 2014 Tahoe/Suburban

Video 

PDF

Webpage

 

2014-2018 Sierra/Silverado

PDF

 

2015-2019 Tahoe/Suburban

Please visit this product page

 

Traverse/Acadia/Outlook - All Years Supplemental Instructions

Webpage

 

 

** 2 Options Are Available ***

Note that if you chose Option 2, you will either need to send in your unit for repair directly, or wait approximately 2 months for us to get a unit to repair.  These are becoming hard to find and people arent returning their cores as often anymore for some reason.  We can usually repair sent in units same day to minimize down time as you cant install the mirror without the drive unit in place.

Option 1: 

Buy strengthened steel gears machined integral to the main spiral shaft + hi-torque motor in quantity 1 set for 1 mirror or 2 sets for 2 mirrors ($64.99 / $99.99).  

Option 2:

Buy a rebuilt complete motor drive unit with new hi-torque motor + steel integral gear already installed and tested ($229.99 minus $30 core return = $199.99).  Please note when buying the complete drive unit, you must choose passenger side or drivers side, and there is a $30 core refund so be sure to send back your old assembly in repairable condition.  Core returns are only applicable to complete drive units and when you are ready to return your core, please email paul@gruvenparts.com for instructions.  Your CORE must be rebuildable.  We cannot accept units which have parts other than the motor/spur gear broken as cores as we would have no way to rebuild them.

***** PLEASE NOTE WHEN ORDERING THE COMPLETE DRIVE UNIT - If you are in a hurry for this, its best to check with us to see if we have any cores.  It could be 4-6 weeks to receive this, based on how many units we have in the shop.  People do not send back their cores very quickly, so we are usually waiting.  You can send in your own unit to be worked as well, and we will apply the $30 core when you send in and try to work it same day or very quick.  

 

Other Parts Available :

We also carry a limited number of used parts to service these mirrors in case you loose or break something.  We have some of everything, so just email paul@gruvenparts.com if you need something.  We do now have some used mirror glass drive units for both sides - these are the little motorized units that actually adjust the angle of the mirror glass.

  

** Product Description **

GruvenParts.com is pleased to announce replacement strengthened STEEL gears and high torque INTERNALLY GROUNDED motors (OEM MOTOR WONT WORK WITH METAL) for the power folding mirrors on most 2007-Present GM trucks including Acadia, Traverse, Enclave, Escalade, Silverado, Avalanche, Tahoe, Suburban, Sierra, Yukon, and Denali.  Also fits ALL 2007-Present GMC pick-up trucks. As many have discovered, the folding mirror assembly on these trucks suffers from a thin, weak, plastic spur gear mounted to the main drive shaft.  The plastic spur gear cracks at the slightest impact or just wears out over time causing an inoperable folding mirror.  The GM motors also get weak and die quickly. Unfortunately, GM will only sell you a complete folding mirror assembly, which will cost you from $700-$1,200 ea after labor and paint, depending on the year/make/model.  And that $ would be wasted on another mirror assembly with another weak, plastic spur gear and weak electric motor that will also soon fail.  Don't waste time or hard earned money on more GM parts that will also soon fail!  

GruvenParts.com has addressed this issue by designing a strengthened integral spiral spur/worm gear shaft made from high strength steel to eliminate the fatigue cracking in the GM plastic gear. We have also designed a replacement high torque electric motor to accompany this new metal gear. Our new electric motor is required when switching out to the metal gear, as the ground circuit in the OEM motor does not allow for a metal gear to be installed. You can chose to buy the gear/motor combo for one or both sides or you can buy complete drive units which are rebuilt and already have the new metal gears and hi torque motor installed in them.  

We have thoroughly tested our redesigned integral gear and high torque motor using a new, OEM mirror assembly and computerized test equipment.  Our test samples barely showed any wear whatsoever, and the testing did include random wacks against the mirror, jamming the mirror operation as it was folding, and manually stressing the mechanism all in an attempt the break the gear.  Each sample was tested more than 5,000 open/close cycles and was still going strong at that point !  

This product carries a LIFETIME WARRANTY!  Provided you don't burn the vehicle, or otherwise smash the mirror into something, you can send back the motor drive unit to us and we'll replace the gear assembly and get it working again free of charge.  You would only be responsible for shipping under this warranty.

 

** Application ** 

Gears and Motors Fit Both Passenger and Drivers Side Power Folding Mirrors.  

All 2007-Present GM Pick Up Trucks Including all Silverado and Sierra with Non-Towing Power Fold Mirrors -- please note the 2014+ pick up trucks used different plastics on the frame, so disassembly of the mirror frame doesnt match the previous gen DIY.  The lower half of the drive unit with all the gears inside IS the same as the previous generation.

All 2007-2014 GM SUV's With Power Folding Non-Tow Mirrors Including Acadia, Traverse, Enclave, Escalade, Tahoe, Suburban, Yukon, and Denali. 

This includes (but not limited to) the following mirror assembly part numbers :

25-83-12-36 (25831236), 25-77-98-49 (25779849)

This list of part numbers will continually grow as we build the interchange list.  This is in no way complete, as most GM trucks made from 2007-2014 with power folding mirrors will use this gear.  If your power folding mirror looks like the mirror shown in the DIY, this gear will fit your vehicle.

 

... We also have many more products for GM, including the towing mirror gears, 2015-Present SUV non-towing mirror gears, door lock motors, door handle inserts !  Check out the GM section of our website!

 

Product Reviews

Previous | Showing reviews 391-400 of 637 | Next

  1. excellent product 5 Star Review

    Posted by on 5th Jun 2019

    The instructions were very thorough and the high quality photos were a big help! The process isn't too difficult. It will require some time to get through the first one so don't attempt it in a hurry. I had good luck with a socket on the spring retainer. I drilled a hole in a piece of wood to hold the worm gear shaft straight while the epoxy set up overnight. That worked real well even though it wasn't perfectly squared. The extremely tiny amount of wobble still functions perfectly. I'm a gruvenparts.com fan!


  2. Perfect fit 5 Star Review

    Posted by on 30th May 2019

    The motor and gear received was a perfect fit for my broken mirror gear and 100% better than the garbage GM installs on these expensive vehicles.
    Installation was by no means easy even with the instruction but with time and patience you can do it.


  3. Decently tough install but definitely worth it 5 Star Review

    Posted by on 29th May 2019

    The installation was not as easy as the instructions might make it sound. However, part of that was due to not having the proper tools to compress the spring. I was extremely resourceful and found a few things to help that part out. It was by far the toughest part of the install.

    Gear and motor is definitely upgraded now. I only did one side and the new side is much louder and faster than the other. Overall, I'm pleased as I regained the functionality and didn't have to pay a shop to do it.


  4. Mirror replacement gears 5 Star Review

    Posted by on 21st May 2019

    The instructions were a little confusing to me. However, the clear pictures helped me to figure out what had to be done. The first mirror was slow and deliberate but the second one was much easier.

    I used a vice to remove the spring retainer. I used a socket to collapse the spring then used a slip jaw pliers to turn the retainer. Then I slowly opened the vice while it retained the spring.. Installation was done the opposite using the vice to collapse the spring and using the pliers to turn the retainer. Be sure to use a vice with vertical jaw height to keep the unit straight when collapsing the spring so it does not pop out.


  5. great product 5 Star Review

    Posted by on 21st May 2019

    Really good product, much better than the cheap plastic ones that originally come on the mirrors. Cheaper than buying a whole new mirror.


  6. Great Product. 5 Star Review

    Posted by on 8th May 2019

    Great parts. Pay attention to the install instructions. Not for the novice. Not a quick in the driveway install. Took a total of 2 1/2 hours for me and I'm a master mechanic. Motor is faster than the OEM, but is not a problem. Saving the parts for the passenger side until it breaks. Bought the motor and assembled gear for both sides, but only the LH was broken now.


  7. 07 silverado 5 Star Review

    Posted by on 6th May 2019

    Precision machined gear,
    fit perfectly in my truck mirror
    direction sheets explained everything
    I Bought the gear already fixed to the shaft
    install was easy


  8. Works great, easy to install 5 Star Review

    Posted by on 6th May 2019

    Initially I bought the pre-attached gear and motor to install myself (I am totally blind and my sighted wife helps me out) but breaking the case was more than she felt comfortable doing so I contacted Paul and decided to go with the fully assembled Complete Motor Drive Unit. The installation was a breeze. Disassembly was exactly as documented in the PDF file. The new assembly works better than the passenger side that I didn't replace.


  9. mirror repair 5 Star Review

    Posted by on 5th May 2019

    i liked this motor and gear replacement and easy repair so i ordered another for the other side


  10. Just easy. 5 Star Review

    Posted by on 5th May 2019

    Easy installation, I just used my laptop instead of printing the the 25 page online instructions, and went out and replaced both motors in 1.5 hrs. Faster than before closing and opening. It may take less mechanically inclined individuals to do it, but it was easy for me.

    I received my motors in a few days. Everyone may experience the same shipping process, as my motors were obviously in stock, and ready to go.


Previous | Showing reviews 391-400 of 637 | Next



Find Your Part

Recent Updates

Newsletter Sign Up




ABOUT SSL CERTIFICATES