HIGH STRENGTH STEEL GEARS ... BECAUSE PLASTIC GEARS BREAK - That's Why You Are On This Page To Begin With !!!!
NOTE : IF YOU ARE ORDERING A COMPLETE DRIVE UNIT ($229.99) PLEASE CHECK WITH US TO ENSURE AVAILABILITY OF CORES.
NOTE 2 : If you are ordering a complete drive unit for a 2014+ pickup model you WILL need to send us your drive unit only (not complete mirror assy). Please email us for the shipping address - paul@gruvenparts.com
NOTE 3 : *** You Cannot Just Install a Metal Gear Without Also Changing The Motor To The GruvenParts INTERNALLY GROUNDED MOTOR ! You Will Short Out the Body Control Module. All Of Our Kits Come With New Motors Which Are Internally Grounded and Work With Metal Gears - So Don't Just Replace the Gear, You Must Replace Both Gear AND Motor When Going to Metal !!! ***
NOTE 4 : *** THESE ARE NOT FOR TOWING MIRRORS - PLEASE CLICK HERE FOR TOWING MIRRORS PRODUCT PAGE ****
DIY Library - Please Select Appropriate DIY for your Vehicle (Non Towing Mirrors!)
2007-2013 GM Silverado, Sierra, Tahoe, Suburban + 2014 Tahoe/Suburban
2014-2018 Sierra/Silverado
2015-2019 Tahoe/Suburban
Please visit this product page
Traverse/Acadia/Outlook - All Years Supplemental Instructions
** 2 Options Are Available ***
Note that if you chose Option 2, you will either need to send in your unit for repair directly, or wait approximately 2 months for us to get a unit to repair. These are becoming hard to find and people arent returning their cores as often anymore for some reason. We can usually repair sent in units same day to minimize down time as you cant install the mirror without the drive unit in place.
Option 1:
Buy strengthened steel gears machined integral to the main spiral shaft + hi-torque motor in quantity 1 set for 1 mirror or 2 sets for 2 mirrors ($64.99 / $99.99).
Option 2:
Buy a rebuilt complete motor drive unit with new hi-torque motor + steel integral gear already installed and tested ($229.99 minus $30 core return = $199.99). Please note when buying the complete drive unit, you must choose passenger side or drivers side, and there is a $30 core refund so be sure to send back your old assembly in repairable condition. Core returns are only applicable to complete drive units and when you are ready to return your core, please email paul@gruvenparts.com for instructions. Your CORE must be rebuildable. We cannot accept units which have parts other than the motor/spur gear broken as cores as we would have no way to rebuild them.
***** PLEASE NOTE WHEN ORDERING THE COMPLETE DRIVE UNIT - If you are in a hurry for this, its best to check with us to see if we have any cores. It could be 4-6 weeks to receive this, based on how many units we have in the shop. People do not send back their cores very quickly, so we are usually waiting. You can send in your own unit to be worked as well, and we will apply the $30 core when you send in and try to work it same day or very quick.
Other Parts Available :
We also carry a limited number of used parts to service these mirrors in case you loose or break something. We have some of everything, so just email paul@gruvenparts.com if you need something. We do now have some used mirror glass drive units for both sides - these are the little motorized units that actually adjust the angle of the mirror glass.
** Product Description **
GruvenParts.com is pleased to announce replacement strengthened STEEL gears and high torque INTERNALLY GROUNDED motors (OEM MOTOR WONT WORK WITH METAL) for the power folding mirrors on most 2007-Present GM trucks including Acadia, Traverse, Enclave, Escalade, Silverado, Avalanche, Tahoe, Suburban, Sierra, Yukon, and Denali. Also fits ALL 2007-Present GMC pick-up trucks. As many have discovered, the folding mirror assembly on these trucks suffers from a thin, weak, plastic spur gear mounted to the main drive shaft. The plastic spur gear cracks at the slightest impact or just wears out over time causing an inoperable folding mirror. The GM motors also get weak and die quickly. Unfortunately, GM will only sell you a complete folding mirror assembly, which will cost you from $700-$1,200 ea after labor and paint, depending on the year/make/model. And that $ would be wasted on another mirror assembly with another weak, plastic spur gear and weak electric motor that will also soon fail. Don't waste time or hard earned money on more GM parts that will also soon fail!
GruvenParts.com has addressed this issue by designing a strengthened integral spiral spur/worm gear shaft made from high strength steel to eliminate the fatigue cracking in the GM plastic gear. We have also designed a replacement high torque electric motor to accompany this new metal gear. Our new electric motor is required when switching out to the metal gear, as the ground circuit in the OEM motor does not allow for a metal gear to be installed. You can chose to buy the gear/motor combo for one or both sides or you can buy complete drive units which are rebuilt and already have the new metal gears and hi torque motor installed in them.
We have thoroughly tested our redesigned integral gear and high torque motor using a new, OEM mirror assembly and computerized test equipment. Our test samples barely showed any wear whatsoever, and the testing did include random wacks against the mirror, jamming the mirror operation as it was folding, and manually stressing the mechanism all in an attempt the break the gear. Each sample was tested more than 5,000 open/close cycles and was still going strong at that point !
This product carries a LIFETIME WARRANTY! Provided you don't burn the vehicle, or otherwise smash the mirror into something, you can send back the motor drive unit to us and we'll replace the gear assembly and get it working again free of charge. You would only be responsible for shipping under this warranty.
** Application **
Gears and Motors Fit Both Passenger and Drivers Side Power Folding Mirrors.
All 2007-Present GM Pick Up Trucks Including all Silverado and Sierra with Non-Towing Power Fold Mirrors -- please note the 2014+ pick up trucks used different plastics on the frame, so disassembly of the mirror frame doesnt match the previous gen DIY. The lower half of the drive unit with all the gears inside IS the same as the previous generation.
All 2007-2014 GM SUV's With Power Folding Non-Tow Mirrors Including Acadia, Traverse, Enclave, Escalade, Tahoe, Suburban, Yukon, and Denali.
This includes (but not limited to) the following mirror assembly part numbers :
25-83-12-36 (25831236), 25-77-98-49 (25779849)
This list of part numbers will continually grow as we build the interchange list. This is in no way complete, as most GM trucks made from 2007-2014 with power folding mirrors will use this gear. If your power folding mirror looks like the mirror shown in the DIY, this gear will fit your vehicle.
... We also have many more products for GM, including the towing mirror gears, 2015-Present SUV non-towing mirror gears, door lock motors, door handle inserts ! Check out the GM section of our website!
Previous | Showing reviews 71-80 of 623 | Next
Posted by Bill Franklin on 17th Nov 2022
Put one motor and gear set in the same day I received them. Mirror was off vehicle which made it a bit harder. Reinstalled mirror the next day. Works great no issues no clearance problems. I had all necessary tools and lithium grease. Yes, mirror removal fought me but it came loose. Thanks for the motors gear sets and instructions and video. Great product.
Posted by RC on 14th Nov 2022
Slightly skeptical about magic fixes but this set of new (gear + motor) appears to have fixed both the side view mirrors on my 2007 Avalanche that had been sitting for a few years.
I did try a cheaper solution of just replacing the gears and electrically isolating the motors - but the gears was not 100% factory spec gear ratio and did not mesh properly.
I would recommend the folks at GRUVENPARTS.
--response --
Thanks for review, and yeah "electrically isolating" the OEM motor is a bad idea, once that wears off you can short out the whole BCM which is $1K if you can even find it.
Posted by Marcus on 11th Nov 2022
Having a 2012 Chevrolet Suburban with a “Dead” folding mirror, I bought two motors and gears to replace the pathetic OEM ones. The motors seem like they have a bit more power than the stock motors and the gears….well…you can’t compare plastic to metal.
The installation process is made easy due to the awesome video GrüvenParts posted on YouTube.
I will also purchase two more for our 2007 GMC Sierra SLT which is also having the notorious folding mirror issue. I highly recommend this upgrade.
Posted by John on 8th Nov 2022
Takes a little time to do but well worth it
Posted by Tim on 8th Nov 2022
Super fast and awesome torque
Posted by Bruce on 18th Oct 2022
Gruvenparts excellent video is second to none. If you have never taken parts apart, this video will be extremely helpful.
I am a returning customer of GruvenParts. I ordered the complete mirror motor assembly. My mirror is now working as it was when new. This is a very quality product.
This company has been around for a very long time. Please support this business. You will not be disappointed. Their customer service is OUTSTANDING!!
--response--
Thanks Bruce. Wish more people knew about us ! Take care and let us know if you have any ideas for other stuff thats breaking.
Posted by Unknown on 12th Oct 2022
I've installed these on multiple GM vehicles. These are the go to parts to fix GM's shameful plastic gearing. Look no further, this is a quality part for a lifetime of functionality.
Posted by Chuck Avery on 10th Oct 2022
I purchased these metal folding mirror gears to replace the stripped and broken cheap plastic ones that came factory on my chevy silverado. Remember though don't just buy some metal gears off the internet. Buy the Gruvenparts gears and motors together for your factory motors will not work with metal gears it grounds out. Gruvenparts has the replacement motors that works perfectly with their metal gears.
Posted by Dave F on 4th Oct 2022
Wonderful product. My mirrors work better than new with these gears. It's hard to believe GM used such crappy little plastic gears, but I guess they saved 50 cents per truck, so it all adds up, LOL. These new gears are a bit tricky to install, but good instructions on the site here. Be sure to follow instructions carefully, and use proper tools. Total installation, both sides, took me between 3 to 4 hours.
Posted by Alan Laib on 2nd Oct 2022
First motors/gears lasted 3 years. Not sure what happened to the first set, but the motors roasted themselves, the commutators/brushes were burnt beyond use and motor end-play was about 1/4"upon removal. New ones installed yesterday, New gears are one piece instead of brass which is alright. Fingers crossed these will last past the old set.
ABOUT SSL CERTIFICATES |