Loading... Please wait...HIGH STRENGTH STEEL GEARS ... BECAUSE PLASTIC GEARS BREAK - That's Why You Are On This Page To Begin With !!!!
**** NEED SPARE POWER FOLDING NON-TOW MIRROR PARTS ? PLEASE CLICK HERE FOR THE SPARE PARTS PAGE ****
NOTE : IF YOU ARE ORDERING A COMPLETE DRIVE UNIT ($229.99) PLEASE CHECK WITH US TO ENSURE AVAILABILITY OF CORES.
NOTE 2 : If you are ordering a complete drive unit for a 2014+ pickup model you WILL need to send us your drive unit only (not complete mirror assy). Please email us for the shipping address - paul@gruvenparts.com
NOTE 3 : *** You Cannot Just Install a Metal Gear Without Also Changing The Motor To The GruvenParts INTERNALLY GROUNDED MOTOR ! You Will Short Out the Body Control Module. All Of Our Kits Come With New Motors Which Are Internally Grounded and Work With Metal Gears - So Don't Just Replace the Gear, You Must Replace Both Gear AND Motor When Going to Metal !!! ***
NOTE 4 : *** THESE ARE NOT FOR TOWING MIRRORS - PLEASE CLICK HERE FOR TOWING MIRRORS PRODUCT PAGE ****
DIY Library - Please Select Appropriate DIY for your Vehicle (Non Towing Mirrors!)
2007-2013 GM Silverado, Sierra, Tahoe, Suburban + 2014 Tahoe/Suburban
2014-2018 Sierra/Silverado
2015-2019 Tahoe/Suburban
Please visit this product page
Traverse/Acadia/Outlook - All Years Supplemental Instructions
** 2 Options Are Available ***
Note that if you chose Option 2, you will either need to send in your unit for repair directly, or wait approximately 2 months for us to get a unit to repair. These are becoming hard to find and people arent returning their cores as often anymore for some reason. We can usually repair sent in units same day to minimize down time as you cant install the mirror without the drive unit in place.
Option 1:
Buy strengthened steel gears machined integral to the main spiral shaft + hi-torque motor in quantity 1 set for 1 mirror or 2 sets for 2 mirrors ($64.99 / $99.99).
Option 2:
Buy a rebuilt complete motor drive unit with new hi-torque motor + steel integral gear already installed and tested ($229.99 minus $30 core return = $199.99). Please note when buying the complete drive unit, you must choose passenger side or drivers side, and there is a $30 core refund so be sure to send back your old assembly in repairable condition. Core returns are only applicable to complete drive units and when you are ready to return your core, please email paul@gruvenparts.com for instructions. Your CORE must be rebuildable. We cannot accept units which have parts other than the motor/spur gear broken as cores as we would have no way to rebuild them.
***** PLEASE NOTE WHEN ORDERING THE COMPLETE DRIVE UNIT - If you are in a hurry for this, its best to check with us to see if we have any cores. It could be 4-6 weeks to receive this, based on how many units we have in the shop. People do not send back their cores very quickly, so we are usually waiting. You can send in your own unit to be worked as well, and we will apply the $30 core when you send in and try to work it same day or very quick.
Other Parts Available :
We also carry a limited number of used parts to service these mirrors in case you loose or break something. We have some of everything, so just email paul@gruvenparts.com if you need something. We do now have some used mirror glass drive units for both sides - these are the little motorized units that actually adjust the angle of the mirror glass.
** Product Description **
GruvenParts.com is pleased to announce replacement strengthened STEEL gears and high torque INTERNALLY GROUNDED motors (OEM MOTOR WONT WORK WITH METAL) for the power folding mirrors on most 2007-Present GM trucks including Acadia, Traverse, Enclave, Escalade, Silverado, Avalanche, Tahoe, Suburban, Sierra, Yukon, and Denali. Also fits ALL 2007-Present GMC pick-up trucks. As many have discovered, the folding mirror assembly on these trucks suffers from a thin, weak, plastic spur gear mounted to the main drive shaft. The plastic spur gear cracks at the slightest impact or just wears out over time causing an inoperable folding mirror. The GM motors also get weak and die quickly. Unfortunately, GM will only sell you a complete folding mirror assembly, which will cost you from $700-$1,200 ea after labor and paint, depending on the year/make/model. And that $ would be wasted on another mirror assembly with another weak, plastic spur gear and weak electric motor that will also soon fail. Don't waste time or hard earned money on more GM parts that will also soon fail!
GruvenParts.com has addressed this issue by designing a strengthened integral spiral spur/worm gear shaft made from high strength steel to eliminate the fatigue cracking in the GM plastic gear. We have also designed a replacement high torque electric motor to accompany this new metal gear. Our new electric motor is required when switching out to the metal gear, as the ground circuit in the OEM motor does not allow for a metal gear to be installed. You can chose to buy the gear/motor combo for one or both sides or you can buy complete drive units which are rebuilt and already have the new metal gears and hi torque motor installed in them.
We have thoroughly tested our redesigned integral gear and high torque motor using a new, OEM mirror assembly and computerized test equipment. Our test samples barely showed any wear whatsoever, and the testing did include random wacks against the mirror, jamming the mirror operation as it was folding, and manually stressing the mechanism all in an attempt the break the gear. Each sample was tested more than 5,000 open/close cycles and was still going strong at that point !
This product carries a LIFETIME WARRANTY! Provided you don't burn the vehicle, or otherwise smash the mirror into something, you can send back the motor drive unit to us and we'll replace the gear assembly and get it working again free of charge. You would only be responsible for shipping under this warranty.
** Application **
Gears and Motors Fit Both Passenger and Drivers Side Power Folding Mirrors.
All 2007-Present GM Pick Up Trucks Including all Silverado and Sierra with Non-Towing Power Fold Mirrors -- please note the 2014+ pick up trucks used different plastics on the frame, so disassembly of the mirror frame doesnt match the previous gen DIY. The lower half of the drive unit with all the gears inside IS the same as the previous generation.
All 2007-2014 GM SUV's With Power Folding Non-Tow Mirrors Including Acadia, Traverse, Enclave, Escalade, Tahoe, Suburban, Yukon, and Denali.
This includes (but not limited to) the following mirror assembly part numbers :
25-83-12-36 (25831236), 25-77-98-49 (25779849)
This list of part numbers will continually grow as we build the interchange list. This is in no way complete, as most GM trucks made from 2007-2014 with power folding mirrors will use this gear. If your power folding mirror looks like the mirror shown in the DIY, this gear will fit your vehicle.
... We also have many more products for GM, including the towing mirror gears, 2015-Present SUV non-towing mirror gears, door lock motors, door handle inserts ! Check out the GM section of our website!
Previous | Showing reviews 491-500 of 637 | Next
Posted by charles graf on 17th Apr 2018
absolute terrific kit for repairing the mirrors on sons gmc truck, be patient when separating the cover from the basket so as not to damage basket, gently work cover off i did both mirrors and they work great
Posted by R Hofock on 15th Apr 2018
Ordered mirror gears and motors for my 06 denali, with great replacement parts and instructions on how to install it was a breeze to do!!
Posted by Z Henslee on 14th Apr 2018
Start to finish took about 45 minutes to remove and install with the directions on web site
Posted by Ken B. on 14th Apr 2018
I ordered the spur gears already attached to the shaft so I could fix the mirrors without waiting 24 hrs for epoxy to dry. The instructions provided were great. Everything went smoothly and the mirrors now fold again. I feel the metal gears are far superior to the original plastic gears which get brittle and break. This was a much cheaper alternative to replacing the mirrors, especially when your mirrors have ALL the options.
Posted by Bob Fries on 13th Apr 2018
The motor and gear/worm gear assembly were as advertised and fit well into the assembly. However, the endplay in the replaced gear/worm gear assembly allowed the new brass gear to rub on the plastic housing. Although the instructions said to just move the bronze bushing to limit the endplay, a small force would just push the bronze bushing back to its original position. I added a small nylon washer to limit the endplay; then it worked fine.
The .pdf online instructions were excellent with good, clear pictures and many helpful tips. One suggestion is to add another arrow on the picture on page 11 to show the exact location of the spring tabs that hold the cover in place. The first top clip is very easy to see above the hinge area; the second tab on my 2008 Yukon was located inside the mirror cavity, not below the hinge area as indicated.
Posted by Gordon Taylor on 6th Apr 2018
Even with 5 Stars, I'm going to be slightly critical. 1) Alignment can be a little tough after you take the time to strip down the parts to clean and lubricate with new grease. Could use a little better description on reassembly, but you'll figure it out with a little effort. I actually reassembled mine back on the mirror base as far as the loose parts and then held it together while taking it back off to reattach the spring assembly. 2) It would be a good idea to mark the motor base on the mirror base for hole allignment prior to disassembly? Asside from those 2 issues, once I got it all worked out, I couldn't wait for the other side to break so I could replace it. Oh, wait a minute! I didn't wait for the other side to break. I went ahead and ordered for the other side anyway. Order for both sides and replace them both at the same time. It will save you some bucks!!! Great product! Can't wait for some more innovative ideas that will help keep the beast in better condition than GM produced!!!
Posted by Joel T on 19th Mar 2018
Took me a couple of hours, only because I did not have a large enough vise to compress the spring. A quick trip to the hardware store and I was able to compress the spring with some threaded rod and nuts/washers on both ends. I did one side and will do the other if / when it goes out. Don't forget to check orientation of the assembly, I also missed that one and had to backtrack a bit. A great product and I will recommend to my friends with these types of GMC mirrors!!
Posted by Joe on 16th Mar 2018
Had the driver side mirror OEM gear go out on me a few months ago. Finally got around to ordering these parts (for both sides) and installed them last night. All together it took about 3 hours, 2 for the first and 1 for the second. I don't do a ton of this kind of work so thing were a bit slow going at first as I took my time to figure it out. The second mirror went much faster. The end result is excellent and very satisfying having them both working the same. The new motors are noticeably faster and operate more smoothly. One might even call them "zippy".
Posted by r.dana.smith@msn.com on 8th Mar 2018
Had these replaced on both sides, only took about an hour. One of my mirror gears was broken, but I went ahead and did both to save time since it would prob break in the future. They were so well!! I have full confidence that these will last forever
Posted by JSS on 3rd Mar 2018
Fast procedure. Only took me about ½hr. Quality motor and gear. Works twice as fast as the other mirror now. Definitely coming back when/if the other mirror gears break!
ABOUT SSL CERTIFICATES |