null
  Loading... Please wait...
  • GruvenParts Replacement High Torque Motors and Strengthened Brass Spur Gears Pre-Mounted to New Steel Main Shafts for GM Vehicles with Power Folding Mirrors.  2 Sets Shown (enough for both mirrors)
  • GruvenParts Complete Motor Drive Units.  Rebuilt unit comes with Strengthened Brass Spur Gear and Hi-Torque Motor Preinstalled and Tested !

GruvenParts.com Strengthened Spur Gear for 2007+ GM Trucks Folding Mirror Assembly

$64.99
Weight:
0.50 LBS
Rating:
Quantity:


Product Description

HIGH STRENGTH STEEL GEARS ... BECAUSE PLASTIC GEARS BREAK - That's Why You Are On This Page To Begin With !!!!

 

**** NEED SPARE POWER FOLDING NON-TOW MIRROR PARTS ? PLEASE CLICK HERE FOR THE SPARE PARTS PAGE ****

 

NOTE : IF YOU ARE ORDERING A COMPLETE DRIVE UNIT ($229.99) PLEASE CHECK WITH US TO ENSURE AVAILABILITY OF CORES.

NOTE 2 : If you are ordering a complete drive unit for a 2014+ pickup model you WILL need to send us your drive unit only (not complete mirror assy). Please email us for the shipping address - paul@gruvenparts.com

NOTE 3 : *** You Cannot Just Install a Metal Gear Without Also Changing The Motor To The GruvenParts INTERNALLY GROUNDED MOTOR !  You Will Short Out the Body Control Module.  All Of Our Kits Come With New Motors Which Are Internally Grounded and Work With Metal Gears - So Don't Just Replace the Gear, You Must Replace Both Gear AND Motor When Going to Metal !!! ***

NOTE 4 : *** THESE ARE NOT FOR TOWING MIRRORS  - PLEASE CLICK HERE FOR TOWING MIRRORS PRODUCT PAGE ****

 

DIY Library - Please Select Appropriate DIY for your Vehicle (Non Towing Mirrors!)

 

2007-2013 GM Silverado, Sierra, Tahoe, Suburban + 2014 Tahoe/Suburban

Video 

PDF

Webpage

 

2014-2018 Sierra/Silverado

PDF

 

2015-2019 Tahoe/Suburban

Please visit this product page

 

Traverse/Acadia/Outlook - All Years Supplemental Instructions

Webpage

 

 

** 2 Options Are Available ***

Note that if you chose Option 2, you will either need to send in your unit for repair directly, or wait approximately 2 months for us to get a unit to repair.  These are becoming hard to find and people arent returning their cores as often anymore for some reason.  We can usually repair sent in units same day to minimize down time as you cant install the mirror without the drive unit in place.

Option 1: 

Buy strengthened steel gears machined integral to the main spiral shaft + hi-torque motor in quantity 1 set for 1 mirror or 2 sets for 2 mirrors ($64.99 / $99.99).  

Option 2:

Buy a rebuilt complete motor drive unit with new hi-torque motor + steel integral gear already installed and tested ($229.99 minus $30 core return = $199.99).  Please note when buying the complete drive unit, you must choose passenger side or drivers side, and there is a $30 core refund so be sure to send back your old assembly in repairable condition.  Core returns are only applicable to complete drive units and when you are ready to return your core, please email paul@gruvenparts.com for instructions.  Your CORE must be rebuildable.  We cannot accept units which have parts other than the motor/spur gear broken as cores as we would have no way to rebuild them.

***** PLEASE NOTE WHEN ORDERING THE COMPLETE DRIVE UNIT - If you are in a hurry for this, its best to check with us to see if we have any cores.  It could be 4-6 weeks to receive this, based on how many units we have in the shop.  People do not send back their cores very quickly, so we are usually waiting.  You can send in your own unit to be worked as well, and we will apply the $30 core when you send in and try to work it same day or very quick.  

 

Other Parts Available :

We also carry a limited number of used parts to service these mirrors in case you loose or break something.  We have some of everything, so just email paul@gruvenparts.com if you need something.  We do now have some used mirror glass drive units for both sides - these are the little motorized units that actually adjust the angle of the mirror glass.

  

** Product Description **

GruvenParts.com is pleased to announce replacement strengthened STEEL gears and high torque INTERNALLY GROUNDED motors (OEM MOTOR WONT WORK WITH METAL) for the power folding mirrors on most 2007-Present GM trucks including Acadia, Traverse, Enclave, Escalade, Silverado, Avalanche, Tahoe, Suburban, Sierra, Yukon, and Denali.  Also fits ALL 2007-Present GMC pick-up trucks. As many have discovered, the folding mirror assembly on these trucks suffers from a thin, weak, plastic spur gear mounted to the main drive shaft.  The plastic spur gear cracks at the slightest impact or just wears out over time causing an inoperable folding mirror.  The GM motors also get weak and die quickly. Unfortunately, GM will only sell you a complete folding mirror assembly, which will cost you from $700-$1,200 ea after labor and paint, depending on the year/make/model.  And that $ would be wasted on another mirror assembly with another weak, plastic spur gear and weak electric motor that will also soon fail.  Don't waste time or hard earned money on more GM parts that will also soon fail!  

GruvenParts.com has addressed this issue by designing a strengthened integral spiral spur/worm gear shaft made from high strength steel to eliminate the fatigue cracking in the GM plastic gear. We have also designed a replacement high torque electric motor to accompany this new metal gear. Our new electric motor is required when switching out to the metal gear, as the ground circuit in the OEM motor does not allow for a metal gear to be installed. You can chose to buy the gear/motor combo for one or both sides or you can buy complete drive units which are rebuilt and already have the new metal gears and hi torque motor installed in them.  

We have thoroughly tested our redesigned integral gear and high torque motor using a new, OEM mirror assembly and computerized test equipment.  Our test samples barely showed any wear whatsoever, and the testing did include random wacks against the mirror, jamming the mirror operation as it was folding, and manually stressing the mechanism all in an attempt the break the gear.  Each sample was tested more than 5,000 open/close cycles and was still going strong at that point !  

This product carries a LIFETIME WARRANTY!  Provided you don't burn the vehicle, or otherwise smash the mirror into something, you can send back the motor drive unit to us and we'll replace the gear assembly and get it working again free of charge.  You would only be responsible for shipping under this warranty.

 

** Application ** 

Gears and Motors Fit Both Passenger and Drivers Side Power Folding Mirrors.  

All 2007-Present GM Pick Up Trucks Including all Silverado and Sierra with Non-Towing Power Fold Mirrors -- please note the 2014+ pick up trucks used different plastics on the frame, so disassembly of the mirror frame doesnt match the previous gen DIY.  The lower half of the drive unit with all the gears inside IS the same as the previous generation.

All 2007-2014 GM SUV's With Power Folding Non-Tow Mirrors Including Acadia, Traverse, Enclave, Escalade, Tahoe, Suburban, Yukon, and Denali. 

This includes (but not limited to) the following mirror assembly part numbers :

25-83-12-36 (25831236), 25-77-98-49 (25779849)

This list of part numbers will continually grow as we build the interchange list.  This is in no way complete, as most GM trucks made from 2007-2014 with power folding mirrors will use this gear.  If your power folding mirror looks like the mirror shown in the DIY, this gear will fit your vehicle.

 

... We also have many more products for GM, including the towing mirror gears, 2015-Present SUV non-towing mirror gears, door lock motors, door handle inserts !  Check out the GM section of our website!

 

Product Reviews

Previous | Showing reviews 461-470 of 637 | Next

  1. GM Folding Mirror Assembly 5 Star Review

    Posted by on 6th Aug 2018

    Installed new parts in mirror and it works great. Online directions are easy to understand and very accurate. Price is reasonable and a lot cheaper than replacing the mirror assembly. The driver side mirror folds in quicker than the passenger side, I think it will be next.


  2. GM Truck power mirror spur gear & motor 5 Star Review

    Posted by on 31st Jul 2018

    Recieved promptly. On line instructional guide was great, walked me through repair procedure easily. Second side went quite quickly once familiar with steps.

    Mirrors are again working properly with no vibration or movement. Look forward to many more years of service.


  3. Fixed my power fold mirror 5 Star Review

    Posted by on 30th Jul 2018

    Part worked great and fixed my mirror. Hardest part was separating the case and releasing the spring without special tools but I got it! 1.5 hours start to finish.


  4. This stuff works. 5 Star Review

    Posted by on 27th Jul 2018

    i installed new motors and a brass gear on both mirrors on The Queen's 2011 Yukon XL. I won't tell you it can be done in an hour a side, but there is nothing difficult about the project. I was very deliberate with my first mirror. Using a socket and a vice I was able to get them apart and back together easy enough.

    The second one went better, but I didn't seat the parts properly going back together so it didn't work properly. Duh!

    Would I undertake it again knowing what I know now? You bet. It was fun and different from the ordinary car repair. It was something that I had not done before. It was not difficult, and that is one high quality brass gear.

    I would rate my skills as moderate with a great set of tools.


  5. Strengthened Spur Gear for 2007-2014 GM Trucks Folding Mirror Assembly 5 Star Review

    Posted by on 24th Jul 2018

    I received these parts in very ample time and was more than pleased with the result. I have assembled the truck mirror with the new parts and it is functioning like new. Don't understand why GM didn't use brass gears to start with.


  6. the pre attached gear +motor 5 Star Review

    Posted by on 20th Jul 2018

    ecery thing was as said and the instructions were great I would recommend to every one that needs one


  7. L/folding mirror motor and gear. 5 Star Review

    Posted by on 14th Jul 2018

    Installation instructions were complete and product worked as advertised.


  8. works great but a little noisy 4 Star Review

    Posted by on 5th Jul 2018

    Replace parts fit perfectly. Lubed everything up and reinstalled. Works perfectly and fast. A little noisier than with the plastic gear but seems solid and will last which is the important part. The only hard part was opening the housing but that has nothing to do with these parts. Hint: I used a drill press and socket to compress the sping and rotate the retaining ring


  9. Finally got to it 5 Star Review

    Posted by on 4th Jul 2018

    Mirror motor hasn't worked since i bought the truck a year and a half ago... bought the kit 3 months ago. finally installed the kit last night with the help of the instructions on this site. worked great. i bought for both sides to save a bit down the road, i may end up changing the other side sooner than later as they now close at different rates lol. probably end up doing it before it gets cold up here in Canada


  10. works better than stock 5 Star Review

    Posted by on 28th Jun 2018

    the part was easy to install, and is faster than stock when opening and closing. one side went out and a purchased parts for both sides. they are a bit louder than the stock motors but that may be due to the brass gears rather than plastic.

    i recommend them for sure


Previous | Showing reviews 461-470 of 637 | Next



Find Your Part

Recent Updates

Newsletter Sign Up




ABOUT SSL CERTIFICATES