null
  Loading... Please wait...
  • GruvenParts Replacement High Torque Motors and Strengthened Brass Spur Gears Pre-Mounted to New Steel Main Shafts for GM Vehicles with Power Folding Mirrors.  2 Sets Shown (enough for both mirrors)
  • GruvenParts Complete Motor Drive Units.  Rebuilt unit comes with Strengthened Brass Spur Gear and Hi-Torque Motor Preinstalled and Tested !

GruvenParts.com Strengthened Spur Gear for 2007+ GM Trucks Folding Mirror Assembly

$64.99
Weight:
0.50 LBS
Rating:
Quantity:


Product Description

HIGH STRENGTH STEEL GEARS ... BECAUSE PLASTIC GEARS BREAK - That's Why You Are On This Page To Begin With !!!!

 

**** NEED SPARE POWER FOLDING NON-TOW MIRROR PARTS ? PLEASE CLICK HERE FOR THE SPARE PARTS PAGE ****

 

NOTE : IF YOU ARE ORDERING A COMPLETE DRIVE UNIT ($229.99) PLEASE CHECK WITH US TO ENSURE AVAILABILITY OF CORES.

NOTE 2 : If you are ordering a complete drive unit for a 2014+ pickup model you WILL need to send us your drive unit only (not complete mirror assy). Please email us for the shipping address - paul@gruvenparts.com

NOTE 3 : *** You Cannot Just Install a Metal Gear Without Also Changing The Motor To The GruvenParts INTERNALLY GROUNDED MOTOR !  You Will Short Out the Body Control Module.  All Of Our Kits Come With New Motors Which Are Internally Grounded and Work With Metal Gears - So Don't Just Replace the Gear, You Must Replace Both Gear AND Motor When Going to Metal !!! ***

NOTE 4 : *** THESE ARE NOT FOR TOWING MIRRORS  - PLEASE CLICK HERE FOR TOWING MIRRORS PRODUCT PAGE ****

 

DIY Library - Please Select Appropriate DIY for your Vehicle (Non Towing Mirrors!)

 

2007-2013 GM Silverado, Sierra, Tahoe, Suburban + 2014 Tahoe/Suburban

Video 

PDF

Webpage

 

2014-2018 Sierra/Silverado

PDF

 

2015-2019 Tahoe/Suburban

Please visit this product page

 

Traverse/Acadia/Outlook - All Years Supplemental Instructions

Webpage

 

 

** 2 Options Are Available ***

Note that if you chose Option 2, you will either need to send in your unit for repair directly, or wait approximately 2 months for us to get a unit to repair.  These are becoming hard to find and people arent returning their cores as often anymore for some reason.  We can usually repair sent in units same day to minimize down time as you cant install the mirror without the drive unit in place.

Option 1: 

Buy strengthened steel gears machined integral to the main spiral shaft + hi-torque motor in quantity 1 set for 1 mirror or 2 sets for 2 mirrors ($64.99 / $99.99).  

Option 2:

Buy a rebuilt complete motor drive unit with new hi-torque motor + steel integral gear already installed and tested ($229.99 minus $30 core return = $199.99).  Please note when buying the complete drive unit, you must choose passenger side or drivers side, and there is a $30 core refund so be sure to send back your old assembly in repairable condition.  Core returns are only applicable to complete drive units and when you are ready to return your core, please email paul@gruvenparts.com for instructions.  Your CORE must be rebuildable.  We cannot accept units which have parts other than the motor/spur gear broken as cores as we would have no way to rebuild them.

***** PLEASE NOTE WHEN ORDERING THE COMPLETE DRIVE UNIT - If you are in a hurry for this, its best to check with us to see if we have any cores.  It could be 4-6 weeks to receive this, based on how many units we have in the shop.  People do not send back their cores very quickly, so we are usually waiting.  You can send in your own unit to be worked as well, and we will apply the $30 core when you send in and try to work it same day or very quick.  

 

Other Parts Available :

We also carry a limited number of used parts to service these mirrors in case you loose or break something.  We have some of everything, so just email paul@gruvenparts.com if you need something.  We do now have some used mirror glass drive units for both sides - these are the little motorized units that actually adjust the angle of the mirror glass.

  

** Product Description **

GruvenParts.com is pleased to announce replacement strengthened STEEL gears and high torque INTERNALLY GROUNDED motors (OEM MOTOR WONT WORK WITH METAL) for the power folding mirrors on most 2007-Present GM trucks including Acadia, Traverse, Enclave, Escalade, Silverado, Avalanche, Tahoe, Suburban, Sierra, Yukon, and Denali.  Also fits ALL 2007-Present GMC pick-up trucks. As many have discovered, the folding mirror assembly on these trucks suffers from a thin, weak, plastic spur gear mounted to the main drive shaft.  The plastic spur gear cracks at the slightest impact or just wears out over time causing an inoperable folding mirror.  The GM motors also get weak and die quickly. Unfortunately, GM will only sell you a complete folding mirror assembly, which will cost you from $700-$1,200 ea after labor and paint, depending on the year/make/model.  And that $ would be wasted on another mirror assembly with another weak, plastic spur gear and weak electric motor that will also soon fail.  Don't waste time or hard earned money on more GM parts that will also soon fail!  

GruvenParts.com has addressed this issue by designing a strengthened integral spiral spur/worm gear shaft made from high strength steel to eliminate the fatigue cracking in the GM plastic gear. We have also designed a replacement high torque electric motor to accompany this new metal gear. Our new electric motor is required when switching out to the metal gear, as the ground circuit in the OEM motor does not allow for a metal gear to be installed. You can chose to buy the gear/motor combo for one or both sides or you can buy complete drive units which are rebuilt and already have the new metal gears and hi torque motor installed in them.  

We have thoroughly tested our redesigned integral gear and high torque motor using a new, OEM mirror assembly and computerized test equipment.  Our test samples barely showed any wear whatsoever, and the testing did include random wacks against the mirror, jamming the mirror operation as it was folding, and manually stressing the mechanism all in an attempt the break the gear.  Each sample was tested more than 5,000 open/close cycles and was still going strong at that point !  

This product carries a LIFETIME WARRANTY!  Provided you don't burn the vehicle, or otherwise smash the mirror into something, you can send back the motor drive unit to us and we'll replace the gear assembly and get it working again free of charge.  You would only be responsible for shipping under this warranty.

 

** Application ** 

Gears and Motors Fit Both Passenger and Drivers Side Power Folding Mirrors.  

All 2007-Present GM Pick Up Trucks Including all Silverado and Sierra with Non-Towing Power Fold Mirrors -- please note the 2014+ pick up trucks used different plastics on the frame, so disassembly of the mirror frame doesnt match the previous gen DIY.  The lower half of the drive unit with all the gears inside IS the same as the previous generation.

All 2007-2014 GM SUV's With Power Folding Non-Tow Mirrors Including Acadia, Traverse, Enclave, Escalade, Tahoe, Suburban, Yukon, and Denali. 

This includes (but not limited to) the following mirror assembly part numbers :

25-83-12-36 (25831236), 25-77-98-49 (25779849)

This list of part numbers will continually grow as we build the interchange list.  This is in no way complete, as most GM trucks made from 2007-2014 with power folding mirrors will use this gear.  If your power folding mirror looks like the mirror shown in the DIY, this gear will fit your vehicle.

 

... We also have many more products for GM, including the towing mirror gears, 2015-Present SUV non-towing mirror gears, door lock motors, door handle inserts !  Check out the GM section of our website!

 

Product Reviews

Previous | Showing reviews 361-370 of 637 | Next

  1. work perfect 5 Star Review

    Posted by on 7th Sep 2019

    Not to hard to do, came up with my own trick for removing that spring retainer, use a faucet socket set. They are perfect for this was able to do it and control the retainer so I didnt go flying, havent seen anybody else do this yet, it's really the best way in my opinion. They are sheet metal "sockets" typically found in the plumbing section at a hardware store. They are meant to tighten the big nut under the sink that holds the faucet down. They are absolutely easy to use for this.


  2. Works great! 4 Star Review

    Posted by on 7th Sep 2019

    So far so good. The power folding mirror motor unit works great and seems smoother than factory. It’s a bit faster and louder than factory but it functions well. The finish could have used some help though which is the main reason I only gave it four stars. The unit I received was a bit weathered, beat up, and the snap clasps were not refastened. Works great though and you can’t see the unit once it’s installed. The 3 factory pins hold everything thing in place so I’m not too concerned about the snap fittings but it did surprise me for a $270 unit.
    I will definitely order the passenger side unit from Gruven once my factory unit goes out and thinking of ordering a full set for my other Escalade. Sounds like that will be soon.


  3. folding mirror's Not 5 Star Review

    Posted by on 6th Sep 2019

    Purchased gear and motor kit for both sides one was broken did both, the repair was very simple and straightforward. I purchased the gears already installed as did not have time to have vehicle down that is good option. Mirrors work great a little faster folding time I think filing the detent did that all and all great product.


  4. 2008 Cadillac Escalade folding mirrors 5 Star Review

    Posted by on 6th Sep 2019

    Replace both broke mirror motors, as advertised, Great product and instructions, just be careful removing the glass. Highly recommend. Thx Paul


  5. Top Shelf Quality! 5 Star Review

    Posted by on 5th Sep 2019

    Passenger mirror gave up so looking for a replacement when I read a forum mentioning this great solution and to save money as well! Thankfully I bought the set of 2 premounted with motors because my driver side mirror was on its way out when I found the plastic gear already cracked when I inspected it. Thanks GruvenParts!


  6. Worked perfectly 5 Star Review

    Posted by on 4th Sep 2019

    Part worked perfectly and removal\installation instructions online were a big help.


  7. Fit works perfectly 5 Star Review

    Posted by on 28th Aug 2019

    Ordered the gear/motor to repair my passenger mirror that suddenly stopped folding in. The parts fit and work perfectly. My only issue is, the parts work to well! I should have ordered parts to do both mirrors. The passenger side once I had it done worked so smooth and a lot faster than the drivers. I have ordered the set for the other mirror.
    Shipping was fast. Very nice company to contact and deal with. Highly recommend.


  8. Installation 5 Star Review

    Posted by on 26th Aug 2019

    I read and re-red the instructions before installation. The instructions were very detailed, and I installed the motor and gear assembly in less than an hour the first time. The mirror worked great. I am ready for the other side to stop working and I will repair it easily.


  9. Mirrors Fold With Authority! 5 Star Review

    Posted by on 23rd Aug 2019

    The RH mirror on our 2013 Tahoe stopped folding about a year ago. Came across Gruvenparts while searching for a replacement nylon gear. Ordered the Motors and pre-assembled brass spur-gear/shaft assemblies. Took about 1-1/2 hours to do the RH mirror as I went slowly/carefully. Sure enough, the white nylon gear was in pieces. After a thorough cleaning to remove the smaller gear pieces and re-lubing with white lithium grease I re-assembled the mechanism and gave it a try before attaching the rest of the mirror. The mirror works better than new and best of all, it'll run for years thanks to the brass spur gear. Doing the RH mirror this weekend. Thanks for such a well-made, robust solution!


  10. Great product 5 Star Review

    Posted by on 18th Aug 2019

    Had the left mirror replaced twice an d right mirror replaced once on 2010 GMC Denali; broken (plastic) pinion gears. $900 dollars per mirror. This product solves that problem forever for $50/mirror. Easy install for any backyard mechanic.


Previous | Showing reviews 361-370 of 637 | Next



Find Your Part

Recent Updates

Newsletter Sign Up




ABOUT SSL CERTIFICATES