Loading... Please wait...HIGH STRENGTH STEEL GEARS ... BECAUSE PLASTIC GEARS BREAK - That's Why You Are On This Page To Begin With !!!!
**** NEED SPARE POWER FOLDING NON-TOW MIRROR PARTS ? PLEASE CLICK HERE FOR THE SPARE PARTS PAGE ****
NOTE : IF YOU ARE ORDERING A COMPLETE DRIVE UNIT ($229.99) PLEASE CHECK WITH US TO ENSURE AVAILABILITY OF CORES.
NOTE 2 : If you are ordering a complete drive unit for a 2014+ pickup model you WILL need to send us your drive unit only (not complete mirror assy). Please email us for the shipping address - paul@gruvenparts.com
NOTE 3 : *** You Cannot Just Install a Metal Gear Without Also Changing The Motor To The GruvenParts INTERNALLY GROUNDED MOTOR ! You Will Short Out the Body Control Module. All Of Our Kits Come With New Motors Which Are Internally Grounded and Work With Metal Gears - So Don't Just Replace the Gear, You Must Replace Both Gear AND Motor When Going to Metal !!! ***
NOTE 4 : *** THESE ARE NOT FOR TOWING MIRRORS - PLEASE CLICK HERE FOR TOWING MIRRORS PRODUCT PAGE ****
DIY Library - Please Select Appropriate DIY for your Vehicle (Non Towing Mirrors!)
2007-2013 GM Silverado, Sierra, Tahoe, Suburban + 2014 Tahoe/Suburban
2014-2018 Sierra/Silverado
2015-2019 Tahoe/Suburban
Please visit this product page
Traverse/Acadia/Outlook - All Years Supplemental Instructions
** 2 Options Are Available ***
Note that if you chose Option 2, you will either need to send in your unit for repair directly, or wait approximately 2 months for us to get a unit to repair. These are becoming hard to find and people arent returning their cores as often anymore for some reason. We can usually repair sent in units same day to minimize down time as you cant install the mirror without the drive unit in place.
Option 1:
Buy strengthened steel gears machined integral to the main spiral shaft + hi-torque motor in quantity 1 set for 1 mirror or 2 sets for 2 mirrors ($64.99 / $99.99).
Option 2:
Buy a rebuilt complete motor drive unit with new hi-torque motor + steel integral gear already installed and tested ($229.99 minus $30 core return = $199.99). Please note when buying the complete drive unit, you must choose passenger side or drivers side, and there is a $30 core refund so be sure to send back your old assembly in repairable condition. Core returns are only applicable to complete drive units and when you are ready to return your core, please email paul@gruvenparts.com for instructions. Your CORE must be rebuildable. We cannot accept units which have parts other than the motor/spur gear broken as cores as we would have no way to rebuild them.
***** PLEASE NOTE WHEN ORDERING THE COMPLETE DRIVE UNIT - If you are in a hurry for this, its best to check with us to see if we have any cores. It could be 4-6 weeks to receive this, based on how many units we have in the shop. People do not send back their cores very quickly, so we are usually waiting. You can send in your own unit to be worked as well, and we will apply the $30 core when you send in and try to work it same day or very quick.
Other Parts Available :
We also carry a limited number of used parts to service these mirrors in case you loose or break something. We have some of everything, so just email paul@gruvenparts.com if you need something. We do now have some used mirror glass drive units for both sides - these are the little motorized units that actually adjust the angle of the mirror glass.
** Product Description **
GruvenParts.com is pleased to announce replacement strengthened STEEL gears and high torque INTERNALLY GROUNDED motors (OEM MOTOR WONT WORK WITH METAL) for the power folding mirrors on most 2007-Present GM trucks including Acadia, Traverse, Enclave, Escalade, Silverado, Avalanche, Tahoe, Suburban, Sierra, Yukon, and Denali. Also fits ALL 2007-Present GMC pick-up trucks. As many have discovered, the folding mirror assembly on these trucks suffers from a thin, weak, plastic spur gear mounted to the main drive shaft. The plastic spur gear cracks at the slightest impact or just wears out over time causing an inoperable folding mirror. The GM motors also get weak and die quickly. Unfortunately, GM will only sell you a complete folding mirror assembly, which will cost you from $700-$1,200 ea after labor and paint, depending on the year/make/model. And that $ would be wasted on another mirror assembly with another weak, plastic spur gear and weak electric motor that will also soon fail. Don't waste time or hard earned money on more GM parts that will also soon fail!
GruvenParts.com has addressed this issue by designing a strengthened integral spiral spur/worm gear shaft made from high strength steel to eliminate the fatigue cracking in the GM plastic gear. We have also designed a replacement high torque electric motor to accompany this new metal gear. Our new electric motor is required when switching out to the metal gear, as the ground circuit in the OEM motor does not allow for a metal gear to be installed. You can chose to buy the gear/motor combo for one or both sides or you can buy complete drive units which are rebuilt and already have the new metal gears and hi torque motor installed in them.
We have thoroughly tested our redesigned integral gear and high torque motor using a new, OEM mirror assembly and computerized test equipment. Our test samples barely showed any wear whatsoever, and the testing did include random wacks against the mirror, jamming the mirror operation as it was folding, and manually stressing the mechanism all in an attempt the break the gear. Each sample was tested more than 5,000 open/close cycles and was still going strong at that point !
This product carries a LIFETIME WARRANTY! Provided you don't burn the vehicle, or otherwise smash the mirror into something, you can send back the motor drive unit to us and we'll replace the gear assembly and get it working again free of charge. You would only be responsible for shipping under this warranty.
** Application **
Gears and Motors Fit Both Passenger and Drivers Side Power Folding Mirrors.
All 2007-Present GM Pick Up Trucks Including all Silverado and Sierra with Non-Towing Power Fold Mirrors -- please note the 2014+ pick up trucks used different plastics on the frame, so disassembly of the mirror frame doesnt match the previous gen DIY. The lower half of the drive unit with all the gears inside IS the same as the previous generation.
All 2007-2014 GM SUV's With Power Folding Non-Tow Mirrors Including Acadia, Traverse, Enclave, Escalade, Tahoe, Suburban, Yukon, and Denali.
This includes (but not limited to) the following mirror assembly part numbers :
25-83-12-36 (25831236), 25-77-98-49 (25779849)
This list of part numbers will continually grow as we build the interchange list. This is in no way complete, as most GM trucks made from 2007-2014 with power folding mirrors will use this gear. If your power folding mirror looks like the mirror shown in the DIY, this gear will fit your vehicle.
... We also have many more products for GM, including the towing mirror gears, 2015-Present SUV non-towing mirror gears, door lock motors, door handle inserts ! Check out the GM section of our website!
Previous | Showing reviews 271-280 of 637 | Next
Posted by Unknown on 22nd Jul 2020
I bought the Gruven replacement motors and already assembled gears to repair my passenger side mirror motor. I bought the pair in case the other was to ever go bad.After repairing the passenger side, I was testing the new installation, and while testing, the drivers side stopped working. Jumped right on to it, and had both sides back in operations in a little less that an hour. The installation video was awesome and made the whole job a snap!
Posted by Ben on 22nd Jul 2020
A little tricky putting the spring back on. But if you mark everything as you take it apart, it will go back on easily.
Works better than before.
Posted by brandon on 21st Jul 2020
Cant say enough about how much better engineered this part is than the OEM part. Worked great and Gruven provided excellent customer service.
Posted by Juan DeLeon on 16th Jul 2020
Replace both motor units for the same price I would have replace 1 hole mirror (out of the dealership).
Each motor took me about 45 minutes: totally worth it!
Allow about a week after confirmation from gruvenparts for your order to come in
Follow the instructional video, not complicated at all
Posted by Stephen Haworth on 13th Jul 2020
Bought the Gruven replacement motors and worm gears to replace the faulty factory mirror motors. The parts came in within 3 days, very fast shipment.
The PDF help file is very beneficial to show disassembly of mirror and installation of new motors with worm gears.
The second mirror only took about 20 minutes start to finish, both are working perfectly thanks to these heavy duty parts.
Posted by tony on 9th Jul 2020
its not too difficult. Folds in and out smoother and faster and than good factory originals
Posted by Steve Cain on 2nd Jul 2020
I have owned my 2009 Suburban for 3 1/2 years. The mirrors retracted when I bought it but shortly afterwards the passenger side mirror worked intermittently. Upon digging into it, I found the gear had split but I couldn't figure out how to get to it so I put everything back together and left the motor unplugged. After 3 1/2 years and not wanting to buy a whole mirror assembly I did a search to see if anyone had a fix for it. That's when I found Gruven Parts and their motor and gear set. To save time I bought the gear already assembled. The installation video was awesome and made it easier to disassemble than when I did it the first time. Got everything installed and back on the vehicle and it works great.
Posted by Unknown on 1st Jul 2020
Do not go and buy just the metal gear . The gears are plastic but it’s not by mistake. If you just replace the gears with metal you'll short the motor and possibly damage your computer. Gruven has the whole solution. A metal gear and a ground isolated motor. After monkeying trying to unsuccessfully fix mine for a couple of days, I was able to install Gruven's parts and get it working in 20 minutes
Posted by MARK BOWERS on 1st Jul 2020
The installation video sold me the units...
One suggestion would be to lubricate the plastic mirror pivot with Anti-seize....
I did and they glide like butter....Work great!
Posted by James Gray III on 30th Jun 2020
I bought two of these, one for passenger side and one for the driver's side. I could not do the passenger side install because working with the lock washer for the spring proved to e tough. The washer got all bent out of shape in the process and I could not make it work after that. Maybe I had the wrong tools. There must be a suggested tool for this application. I then ordered option 3 for the passenger's side. Worked like a charm. With more knowledge, I did the driver's side with this product and it works 95%... I think the small degradation in performance was because I did not grind a part down smooth enough. Anyway, the part was perfect, the mechanic as not. I would recommend Option 3 unless you are very skilled and have the right tools.
ABOUT SSL CERTIFICATES |