null
  Loading... Please wait...
  • GruvenParts Replacement High Torque Motors and Strengthened Brass Spur Gears Pre-Mounted to New Steel Main Shafts for GM Vehicles with Power Folding Mirrors.  2 Sets Shown (enough for both mirrors)
  • GruvenParts Complete Motor Drive Units.  Rebuilt unit comes with Strengthened Brass Spur Gear and Hi-Torque Motor Preinstalled and Tested !

GruvenParts.com Strengthened Spur Gear for 2007+ GM Trucks Folding Mirror Assembly

$64.99
Weight:
0.50 LBS
Rating:
Quantity:


Product Description

HIGH STRENGTH STEEL GEARS ... BECAUSE PLASTIC GEARS BREAK - That's Why You Are On This Page To Begin With !!!!

 

**** NEED SPARE POWER FOLDING NON-TOW MIRROR PARTS ? PLEASE CLICK HERE FOR THE SPARE PARTS PAGE ****

 

NOTE : IF YOU ARE ORDERING A COMPLETE DRIVE UNIT ($229.99) PLEASE CHECK WITH US TO ENSURE AVAILABILITY OF CORES.

NOTE 2 : If you are ordering a complete drive unit for a 2014+ pickup model you WILL need to send us your drive unit only (not complete mirror assy). Please email us for the shipping address - paul@gruvenparts.com

NOTE 3 : *** You Cannot Just Install a Metal Gear Without Also Changing The Motor To The GruvenParts INTERNALLY GROUNDED MOTOR !  You Will Short Out the Body Control Module.  All Of Our Kits Come With New Motors Which Are Internally Grounded and Work With Metal Gears - So Don't Just Replace the Gear, You Must Replace Both Gear AND Motor When Going to Metal !!! ***

NOTE 4 : *** THESE ARE NOT FOR TOWING MIRRORS  - PLEASE CLICK HERE FOR TOWING MIRRORS PRODUCT PAGE ****

 

DIY Library - Please Select Appropriate DIY for your Vehicle (Non Towing Mirrors!)

 

2007-2013 GM Silverado, Sierra, Tahoe, Suburban + 2014 Tahoe/Suburban

Video 

PDF

Webpage

 

2014-2018 Sierra/Silverado

PDF

 

2015-2019 Tahoe/Suburban

Please visit this product page

 

Traverse/Acadia/Outlook - All Years Supplemental Instructions

Webpage

 

 

** 2 Options Are Available ***

Note that if you chose Option 2, you will either need to send in your unit for repair directly, or wait approximately 2 months for us to get a unit to repair.  These are becoming hard to find and people arent returning their cores as often anymore for some reason.  We can usually repair sent in units same day to minimize down time as you cant install the mirror without the drive unit in place.

Option 1: 

Buy strengthened steel gears machined integral to the main spiral shaft + hi-torque motor in quantity 1 set for 1 mirror or 2 sets for 2 mirrors ($64.99 / $99.99).  

Option 2:

Buy a rebuilt complete motor drive unit with new hi-torque motor + steel integral gear already installed and tested ($229.99 minus $30 core return = $199.99).  Please note when buying the complete drive unit, you must choose passenger side or drivers side, and there is a $30 core refund so be sure to send back your old assembly in repairable condition.  Core returns are only applicable to complete drive units and when you are ready to return your core, please email paul@gruvenparts.com for instructions.  Your CORE must be rebuildable.  We cannot accept units which have parts other than the motor/spur gear broken as cores as we would have no way to rebuild them.

***** PLEASE NOTE WHEN ORDERING THE COMPLETE DRIVE UNIT - If you are in a hurry for this, its best to check with us to see if we have any cores.  It could be 4-6 weeks to receive this, based on how many units we have in the shop.  People do not send back their cores very quickly, so we are usually waiting.  You can send in your own unit to be worked as well, and we will apply the $30 core when you send in and try to work it same day or very quick.  

 

Other Parts Available :

We also carry a limited number of used parts to service these mirrors in case you loose or break something.  We have some of everything, so just email paul@gruvenparts.com if you need something.  We do now have some used mirror glass drive units for both sides - these are the little motorized units that actually adjust the angle of the mirror glass.

  

** Product Description **

GruvenParts.com is pleased to announce replacement strengthened STEEL gears and high torque INTERNALLY GROUNDED motors (OEM MOTOR WONT WORK WITH METAL) for the power folding mirrors on most 2007-Present GM trucks including Acadia, Traverse, Enclave, Escalade, Silverado, Avalanche, Tahoe, Suburban, Sierra, Yukon, and Denali.  Also fits ALL 2007-Present GMC pick-up trucks. As many have discovered, the folding mirror assembly on these trucks suffers from a thin, weak, plastic spur gear mounted to the main drive shaft.  The plastic spur gear cracks at the slightest impact or just wears out over time causing an inoperable folding mirror.  The GM motors also get weak and die quickly. Unfortunately, GM will only sell you a complete folding mirror assembly, which will cost you from $700-$1,200 ea after labor and paint, depending on the year/make/model.  And that $ would be wasted on another mirror assembly with another weak, plastic spur gear and weak electric motor that will also soon fail.  Don't waste time or hard earned money on more GM parts that will also soon fail!  

GruvenParts.com has addressed this issue by designing a strengthened integral spiral spur/worm gear shaft made from high strength steel to eliminate the fatigue cracking in the GM plastic gear. We have also designed a replacement high torque electric motor to accompany this new metal gear. Our new electric motor is required when switching out to the metal gear, as the ground circuit in the OEM motor does not allow for a metal gear to be installed. You can chose to buy the gear/motor combo for one or both sides or you can buy complete drive units which are rebuilt and already have the new metal gears and hi torque motor installed in them.  

We have thoroughly tested our redesigned integral gear and high torque motor using a new, OEM mirror assembly and computerized test equipment.  Our test samples barely showed any wear whatsoever, and the testing did include random wacks against the mirror, jamming the mirror operation as it was folding, and manually stressing the mechanism all in an attempt the break the gear.  Each sample was tested more than 5,000 open/close cycles and was still going strong at that point !  

This product carries a LIFETIME WARRANTY!  Provided you don't burn the vehicle, or otherwise smash the mirror into something, you can send back the motor drive unit to us and we'll replace the gear assembly and get it working again free of charge.  You would only be responsible for shipping under this warranty.

 

** Application ** 

Gears and Motors Fit Both Passenger and Drivers Side Power Folding Mirrors.  

All 2007-Present GM Pick Up Trucks Including all Silverado and Sierra with Non-Towing Power Fold Mirrors -- please note the 2014+ pick up trucks used different plastics on the frame, so disassembly of the mirror frame doesnt match the previous gen DIY.  The lower half of the drive unit with all the gears inside IS the same as the previous generation.

All 2007-2014 GM SUV's With Power Folding Non-Tow Mirrors Including Acadia, Traverse, Enclave, Escalade, Tahoe, Suburban, Yukon, and Denali. 

This includes (but not limited to) the following mirror assembly part numbers :

25-83-12-36 (25831236), 25-77-98-49 (25779849)

This list of part numbers will continually grow as we build the interchange list.  This is in no way complete, as most GM trucks made from 2007-2014 with power folding mirrors will use this gear.  If your power folding mirror looks like the mirror shown in the DIY, this gear will fit your vehicle.

 

... We also have many more products for GM, including the towing mirror gears, 2015-Present SUV non-towing mirror gears, door lock motors, door handle inserts !  Check out the GM section of our website!

 

Product Reviews

Previous | Showing reviews 161-170 of 624 | Next

  1. watch the video. its easy if you follow instructions 5 Star Review

    Posted by on 1st Aug 2021

    Fixed the mirror on our Escalade in a couple of hours. Much better to repair than replace because now it’s stronger and faster than stock


  2. simple inatructions, no getting all greasy 5 Star Review

    Posted by on 28th Jul 2021

    Appreciate you doing all the gross dirty greasy work, thank you for making this simple. Sticker shock was there initially if I'm honest, and now that it's done I'm 100% happy I pulled the trigger.

    Side effect: now my passenger mirror is laggy in comparison, so I'll have to swap it too. My '12 Escalade Moto Moto thanks you very much for this upgraded ear-wagger.


  3. mirrors that usetoo tilt in 5 Star Review

    Posted by on 26th Jul 2021

    good idea some one was thinking works fine


  4. Right solution for Power Mirror 5 Star Review

    Posted by on 6th Jul 2021

    My wife's Yukon 2010 stop folding on driver side. it makes hard to park inside garage. I find this "GruvenParts.com" from Youtube. I order pre-mount gear which save me time to wait for installation. The part is perfectly replace original damaged plastic gear. Instruction video is very detail which help me dissemble and install mirror glass. It is the best solution for your power mirror issue. Plus, shipping is very fast.


  5. Well worth the $ 5 Star Review

    Posted by on 3rd Jul 2021

    It's not an easy job but the instruction video is excellent. My second side was much easier than the first.


  6. Outstanding product 5 Star Review

    Posted by on 25th Jun 2021

    This is an outstanding product. I would recommend it to anyone. I just bought the gears and motors and spent the $10 so they came already to go. Don’t let let steps fool you, it’s not that hard and even my wife joined in. Most important thing is before you take the motor off the truck, mark the base in reference to the window. That way as you disassemble and reassemble you can constantly check the function. Awesome product. Wife’s very happy now!!


  7. Very easy repair 5 Star Review

    Posted by on 18th Jun 2021

    I bought two of the rebuilt folding mirror motor assemblies and was easily able to replace in my 2013 Avalanche using the provided instructions and you tube DIY videos available. Parts were exact fit and work like a charm. Very satisfied.


  8. GMC truck folding mirror gear 5 Star Review

    Posted by on 7th Jun 2021

    The gears are of high quality and much more stout than the nylon originals that broke. My only concern that one side of gear shaft was too large for brass fitting which was part of old gear. Tried to enlarge fitting and split. Using Drexel ground down to appropriate size and worked with no problem. Relatively easy fix and saved a lot of money. Gear is nosier as expected. Video was easy to understand.


  9. Excellent quality and great repair documentation!!! 5 Star Review

    Posted by on 21st May 2021

    Had to repair the broken plastic gear in my wife's 2012 - Traverse passenger side folding mirror. The documentation and video on how to repair the motor was excellent and I found the details on removing the Traverse/Acadia mirror elsewhere as it's a little different from the Suburban and Trucks. The repair went smooth and was able to easily pull the motor from the housing still attached to the vehicle. Everything went good and it works perfectly now. My only complaints are the mirror is much faster now than the OEM geared one - LOL and also it's quite a bit nosier. I'd assume the noise is due to the brass/metal gears vs. the stock plastic gears, but not that big of a deal.


  10. Quality gear and motor 5 Star Review

    Posted by on 17th May 2021

    I chose to buy the gear and go torque motor. Received the parts today and immediately went to work. The process on my 2014 GMC Sierra was similar, BUT not the same. The sequence of tearing down my mirrors was different, as well as my gear box. My gear box was a three piece unit, with the top and bottom being plastic! I was able to make the new gears work, but not with a lot of cyphering. If you are not fairly mechanically inclined, I suggest you buy the entire rebuilt gear box. Gruvenparts, are you aware that there are plastic gear boxes out there? You may want to address that in case you get one returned as a core. All in all, great product.

    -- response --

    Thanks Matt. The only real difference in the drive unit is the 2014+ pick up trucks got a plastic top cap and use a circuit board. The bottom of the unit including ALL gears and motor is same as previous gen. Glad you got it all working and let us know if you need more.

    Paul@GruvenParts.com


Previous | Showing reviews 161-170 of 624 | Next



Find Your Part

Recent Updates

Newsletter Sign Up




ABOUT SSL CERTIFICATES