null
  Loading... Please wait...
  • GruvenParts.com ALL BRASS gear for Ford Trucks Power Folding TOW Mirrors
  • Please note the orientation of the worm gear section for driver and passenger sides.  They are opposite !

Towing Mirror Gears - Ford Trucks

$99.99
Weight:
1.00 LBS
Rating:


Choose Your Options

Quantity:

Product Description

Click Here for DIY Instructions !!  

LIFETIME WARRANTY ON ALL GEARS AND MOTORS !

GruvenParts.com is PROUD to release these SOLID BRASS gears, hardened steel center shafts, and high torque replacement motors for the Ford truck power folding TOW mirrors !  The helical cut brass gears exactly match the Ford plastic version and are MUCH STRONGER so they will not chip, strip, or break.  The center shafts are machined in house from hardened steel to exactly match the OEM shape.  And, our tried and true reliable high torque replacement motors have the factory correct wiring plug and come with a new motor-gear preinstalled as well - PLUG AND PLAY, READY TO DROP IN !  This is a GREAT WAY to save about $1300 per side, as Ford will not sell the gear or motor separately - instead, they make you buy an entire new power folding/telescoping mirror assembly (with more plastic gears and failure prone motors that will also soon break).  Dont throw away your hard earned money!  

FIX // STRENGTHEN // IMPROVE YOUR TOW MIRRORS AND SAVE THOUSANDS  !!!

The replacement brass gear comes either pre-attached to a newly machined steel main shaft, or save a few bucks and easily attach a single loose gear to your existing main shaft via 24 hour cure epoxy, such as 24 hour JB weld.  The pre-attached option is faster, if you dont want to wait for the 24 hour epoxy to cure as it will come with the brass gear section pressed onto a new main center shaft, ready to install.  We suggest the pre-attached option as it may run more true (depending on how good you are at using epoxy).

PLEASE NOTE : When ordering the pre-attached option, there is driver side and passenger side option, so please choose accordingly.

The replacement high torque motor comes with its own motor-gear already pressed on and is ready to drop in - it plugs right into the Ford wiring harness.  This is a stronger more reliable motor !

You will need 2 motors and 2 gears to fix 1 Power Folding Mirror.  You will need 2 power extend motors to fix power extend on both sides as well. Chose your options from the drop down menu when ordering and note the package pricing to save $$ !!   

These gears and motors carry a LIFETIME WARRANTY !

Please Note : The brass gears will not replace the power telescoping gears.  If you need assistance with power telescoping gears, please hit "Contact Us" and let us know about it, we can build those too if people want them !  We already do offer the power telescope motors, which are not the same as the power fold motors.

This product fits all F150/250/350/450/550/650 Ford Trucks with the TOWING power folding mirrors from 2008-Present.  The following list of part numbers is in NO WAY complete, we will be adding to this frequently.

DL3Z-17682-AA
DL3Z-17683-AA
9CZ-17682-LA
9CZ-17683-FA
DC3Z-17683-MA

 

 

 

 

Product Reviews

Previous | Showing reviews 11-20 of 25 | Next

  1. I gave 4 stars cause I believe that there is no such thing as best 4 Star Review

    Posted by on 14th Nov 2020

    Good product well worth the time to fix an issue without throwing away other good parts


  2. Fixed the issue! 4 Star Review

    Posted by on 9th Nov 2020

    Overall, the instructions and product were great. Installation would’ve been impossible without their great set of instructions. Only reason for not giving 5 stars is the electric motors a a bit noisier than the stock motors. But other than that I’m super pumped to have my power fold option working again on my mirrors as Ford wanted me to bend over when I asked them what to do to fix the issue (damn near $1,300 a mirror!). I’ve already shared with all my other super duty owners as they all have the same issue. So glad to have a lifetime warranty and the ability to help out my fellow super duty owners that don’t want to bend over for Ford.

    - response from gruvenparts -
    Thanks for the honest review, Kevin. Yes they can be a bit more noisy before they break in, they should quiet down over time but metal on metal is louder than metal on plastic. Its good that you dont have plastic gears though as they wont break anymore, and yes $1300 for another mirror assy is ridiculous considering its going to come with more plastic gears .. and we already know how that story ends.

    Paul@GruvenParts.com


  3. Better Than OEM 5 Star Review

    Posted by on 3rd Nov 2020

    The motors and gears for the mirrors on my 2013 F250 fit perfectly. As mentioned in other posts, there is much more noise in the operation of the mirrors (my wife stops talking when the mirrors are operating... :+)) but they work great and move much faster folding in and out than the OEM parts. I followed the online installation procedures and all worked out well. I will say, due to so many “little” parts, this repair is not for the faint of heart. The first mirror took about 6 hours. After gaining that knowledge, the 2nd one took 3 hours. Great product!!


  4. Gruven just rocks 5 Star Review

    Posted by on 23rd Sep 2020

    What awesome parts! I bought the F-350 R & L mirror parts including the motors and gears. The parts arrived three days early, from GA to CA. The instructions below were complete, with decent pictures. Like Adrean mentioned, take your time and take lots of pictures. I tested the sub assemblies after each step, by plugging into the door connector and checking the motor operations. I just saved $1300 for the passenger mirror. I have the driver parts and when it fails, I’ll rebuild it.

    Thank you Gruven.

    -- response --

    Thanks Peter. Please help spread the word, its crazy people are going to the Ford dealer and spending $1300+ on new entire mirror assemblies when 99% can just be fixed replacing/upgrading the fold motors/gears and power extend motors. Take care and would love to see pics of the rig if you can send some.

    Paul@GruvenParts.com


  5. F250 mirror folding motor kit 5 Star Review

    Posted by on 12th Sep 2020

    These motor & gear sets fit flawlessly!
    My mirror, in this case drivers side, fold and unfold much faster than the OEM equipped passenger side. I went with the brass gears and did notice that function is a bit louder than the OEM plastic gears but not objectionable so.


  6. Excellent good quality fix 5 Star Review

    Posted by on 9th Aug 2020

    Well worth the effort to fit these aftermarket parts as it fixes a part you can’t buy from Ford and better quality. As with Ford you have to replace the whole mirror .
    If I could make a suggestion only to have a you tube or manual to show how to pull apart and refit .


  7. Ford Tow mirror repair 5 Star Review

    Posted by on 25th Jun 2020

    Very straightforward. Excellent products.


  8. well worth the money 5 Star Review

    Posted by on 1st Jun 2020

    My mirrors didn't do anything or make and noises when attempting to fold them. The 2 mirror kit with the gears installed is definitely worth the money. They fold great now. For anybody doing this repair make sure you take your time and follow the directions and you will complete it without breaking anything.
    Just some advice for anyone doing this. I had a stripped main gear in my passenger's mirror and I didnt want to try and find a new one. So I rotated it 180 degrees and installed the mirror in the open position and it worked great. The mirror doesnt even move 90 degrees from open to closed so dont be afraid to put it back together with a bad main gear, that side isnt used.


  9. Preforming well. 5 Star Review

    Posted by on 11th May 2020

    Driver side motor & gear set. Opens a bit faster than passenger side but a bit more noisey. Well satisfied.


  10. When Super Duty is not so super 5 Star Review

    Posted by on 10th May 2020

    Forget ‘kill all the lawyers’ and change it to ‘kill all the bean counters’. In what logical world would anybody put plastic gears into a truck mirror system. The ONLY reason is to save a few bucks per truck and pocket the difference. A quick show of hands would reveal ANY F250 or other truck owner would gladly pay a bit more upfront to get something that lasts. Listen Ford, we did NOT go shopping for a toy truck we went shopping for a work truck. Bottom line, Gruven makes parts that fix Ford’s F-up.


Previous | Showing reviews 11-20 of 25 | Next



Find Your Part

Newsletter Sign Up




ABOUT SSL CERTIFICATES