Description
GM Power & Brake Pedal Adjuster Gear Kit (Solid Brass)
Stop wasting money on entire pedal adjuster assemblies—fix them permanently with GruvenParts' custom-engineered Solid Brass gears.
The factory gas and brake pedal adjuster units in many 1996–2014 GM trucks and SUVs fail because of a single, brittle plastic spur gear. When these gears crack, dealers often demand hundreds of dollars for a full replacement assembly that contains the exact same defective part. GruvenParts provides a permanent, engineered solution: high-strength Solid Brass gears designed to outlast the vehicle.
The Engineering Gap: OEM Failure vs. GruvenParts Solution
|
Feature |
|
OEM Factory Unit |
|
GruvenParts Brass Solution |
|
Gear Material |
|
Thin, fragile plastic. |
|
High-strength Solid Gear Brass. |
|
Failure Mode |
|
Fatigue cracking from age/use. |
|
Virtually indestructible. |
|
Repair Cost |
|
Expensive full assembly replacement. |
|
Affordable DIY gear kit. |
Critical Technical Note: Pedal Gear Fitment
Before ordering, you must verify your gear tooth count.
- This kit is designed for the standard 30-tooth gear found in most GMT800 and GMT900 pedal adjuster units.
- Warning: Some 2007–2009 GMT900 gas pedal adjuster units utilize a 21-tooth gear. These 30-tooth brass gears will not replace the 21-tooth version. Please verify your gear count or contact us if you are uncertain about your fitment.
Options & Ordering
- Gear Kits: Choose your gear option from the drop-down menu.
- Bundle & Save: Combine both Gas and Brake pedal gears in one order to save money!
Application & Fitment
This kit is designed for gas and brake pedal adjuster mechanisms found in most 1996–2014 GM trucks and SUVs, including:
- Chevy: Silverado, Tahoe, Suburban, Avalanche.
- GMC: Sierra, Yukon, Denali.
- Cadillac: Escalade.
- Other: Saab 9-7x.
- Compatible OEM Part Numbers: 15123610, 15123611, 25968688, 25968689, 15188772, 22847341, 25832864, 15847349, 19121978, and many others.
Note: This list is not complete. If you have a specific part number, please contact us to verify compatibility.
Installation & DIY Support
Installation is straightforward and does not require dash removal.
- Process: Simply remove the 2 or 3 Torx screws holding the case halves together. Unthread the old plastic gear from the screw shaft and thread on the new brass gear.
- Thread Notes: On brake pedal adjuster gears, the internal thread is Right-Hand (RH). On gas pedal adjuster gears, the thread may be RH or Left-Hand (LH) depending on the specific model.
Warranty
This product carries a Limited Lifetime Warranty. We stand behind our precision-machined brass gears—if they fail under normal operating conditions, we will replace them free of charge (customer is responsible for shipping costs).
Are you looking for parts for the 2015+ GM Trucks (GMT-K2XX)? Please contact us and let us know! We are currently evaluating demand to develop those parts as well.
Need other GM repair parts? Click here to visit our GM Section!
