null
  Loading... Please wait...
  • GruvenParts Replacement High Torque Motors and Strengthened Brass Spur Gears Pre-Mounted to New Steel Main Shafts for GM Vehicles with Power Folding Mirrors.  2 Sets Shown (enough for both mirrors)
  • GruvenParts Complete Motor Drive Units.  Rebuilt unit comes with Strengthened Brass Spur Gear and Hi-Torque Motor Preinstalled and Tested !

GruvenParts.com Strengthened Spur Gear for 2007+ GM Trucks Folding Mirror Assembly

$64.99
Weight:
0.50 LBS
Rating:
Quantity:


Product Description

HIGH STRENGTH STEEL GEARS ... BECAUSE PLASTIC GEARS BREAK - That's Why You Are On This Page To Begin With !!!!

 

**** NEED SPARE POWER FOLDING NON-TOW MIRROR PARTS ? PLEASE CLICK HERE FOR THE SPARE PARTS PAGE ****

 

NOTE : IF YOU ARE ORDERING A COMPLETE DRIVE UNIT ($229.99) PLEASE CHECK WITH US TO ENSURE AVAILABILITY OF CORES.

NOTE 2 : If you are ordering a complete drive unit for a 2014+ pickup model you WILL need to send us your drive unit only (not complete mirror assy). Please email us for the shipping address - paul@gruvenparts.com

NOTE 3 : *** You Cannot Just Install a Metal Gear Without Also Changing The Motor To The GruvenParts INTERNALLY GROUNDED MOTOR !  You Will Short Out the Body Control Module.  All Of Our Kits Come With New Motors Which Are Internally Grounded and Work With Metal Gears - So Don't Just Replace the Gear, You Must Replace Both Gear AND Motor When Going to Metal !!! ***

NOTE 4 : *** THESE ARE NOT FOR TOWING MIRRORS  - PLEASE CLICK HERE FOR TOWING MIRRORS PRODUCT PAGE ****

 

DIY Library - Please Select Appropriate DIY for your Vehicle (Non Towing Mirrors!)

 

2007-2013 GM Silverado, Sierra, Tahoe, Suburban + 2014 Tahoe/Suburban

Video 

PDF

Webpage

 

2014-2018 Sierra/Silverado

PDF

 

2015-2019 Tahoe/Suburban

Please visit this product page

 

Traverse/Acadia/Outlook - All Years Supplemental Instructions

Webpage

 

 

** 2 Options Are Available ***

Note that if you chose Option 2, you will either need to send in your unit for repair directly, or wait approximately 2 months for us to get a unit to repair.  These are becoming hard to find and people arent returning their cores as often anymore for some reason.  We can usually repair sent in units same day to minimize down time as you cant install the mirror without the drive unit in place.

Option 1: 

Buy strengthened steel gears machined integral to the main spiral shaft + hi-torque motor in quantity 1 set for 1 mirror or 2 sets for 2 mirrors ($64.99 / $99.99).  

Option 2:

Buy a rebuilt complete motor drive unit with new hi-torque motor + steel integral gear already installed and tested ($229.99 minus $30 core return = $199.99).  Please note when buying the complete drive unit, you must choose passenger side or drivers side, and there is a $30 core refund so be sure to send back your old assembly in repairable condition.  Core returns are only applicable to complete drive units and when you are ready to return your core, please email paul@gruvenparts.com for instructions.  Your CORE must be rebuildable.  We cannot accept units which have parts other than the motor/spur gear broken as cores as we would have no way to rebuild them.

***** PLEASE NOTE WHEN ORDERING THE COMPLETE DRIVE UNIT - If you are in a hurry for this, its best to check with us to see if we have any cores.  It could be 4-6 weeks to receive this, based on how many units we have in the shop.  People do not send back their cores very quickly, so we are usually waiting.  You can send in your own unit to be worked as well, and we will apply the $30 core when you send in and try to work it same day or very quick.  

 

Other Parts Available :

We also carry a limited number of used parts to service these mirrors in case you loose or break something.  We have some of everything, so just email paul@gruvenparts.com if you need something.  We do now have some used mirror glass drive units for both sides - these are the little motorized units that actually adjust the angle of the mirror glass.

  

** Product Description **

GruvenParts.com is pleased to announce replacement strengthened STEEL gears and high torque INTERNALLY GROUNDED motors (OEM MOTOR WONT WORK WITH METAL) for the power folding mirrors on most 2007-Present GM trucks including Acadia, Traverse, Enclave, Escalade, Silverado, Avalanche, Tahoe, Suburban, Sierra, Yukon, and Denali.  Also fits ALL 2007-Present GMC pick-up trucks. As many have discovered, the folding mirror assembly on these trucks suffers from a thin, weak, plastic spur gear mounted to the main drive shaft.  The plastic spur gear cracks at the slightest impact or just wears out over time causing an inoperable folding mirror.  The GM motors also get weak and die quickly. Unfortunately, GM will only sell you a complete folding mirror assembly, which will cost you from $700-$1,200 ea after labor and paint, depending on the year/make/model.  And that $ would be wasted on another mirror assembly with another weak, plastic spur gear and weak electric motor that will also soon fail.  Don't waste time or hard earned money on more GM parts that will also soon fail!  

GruvenParts.com has addressed this issue by designing a strengthened integral spiral spur/worm gear shaft made from high strength steel to eliminate the fatigue cracking in the GM plastic gear. We have also designed a replacement high torque electric motor to accompany this new metal gear. Our new electric motor is required when switching out to the metal gear, as the ground circuit in the OEM motor does not allow for a metal gear to be installed. You can chose to buy the gear/motor combo for one or both sides or you can buy complete drive units which are rebuilt and already have the new metal gears and hi torque motor installed in them.  

We have thoroughly tested our redesigned integral gear and high torque motor using a new, OEM mirror assembly and computerized test equipment.  Our test samples barely showed any wear whatsoever, and the testing did include random wacks against the mirror, jamming the mirror operation as it was folding, and manually stressing the mechanism all in an attempt the break the gear.  Each sample was tested more than 5,000 open/close cycles and was still going strong at that point !  

This product carries a LIFETIME WARRANTY!  Provided you don't burn the vehicle, or otherwise smash the mirror into something, you can send back the motor drive unit to us and we'll replace the gear assembly and get it working again free of charge.  You would only be responsible for shipping under this warranty.

 

** Application ** 

Gears and Motors Fit Both Passenger and Drivers Side Power Folding Mirrors.  

All 2007-Present GM Pick Up Trucks Including all Silverado and Sierra with Non-Towing Power Fold Mirrors -- please note the 2014+ pick up trucks used different plastics on the frame, so disassembly of the mirror frame doesnt match the previous gen DIY.  The lower half of the drive unit with all the gears inside IS the same as the previous generation.

All 2007-2014 GM SUV's With Power Folding Non-Tow Mirrors Including Acadia, Traverse, Enclave, Escalade, Tahoe, Suburban, Yukon, and Denali. 

This includes (but not limited to) the following mirror assembly part numbers :

25-83-12-36 (25831236), 25-77-98-49 (25779849)

This list of part numbers will continually grow as we build the interchange list.  This is in no way complete, as most GM trucks made from 2007-2014 with power folding mirrors will use this gear.  If your power folding mirror looks like the mirror shown in the DIY, this gear will fit your vehicle.

 

... We also have many more products for GM, including the towing mirror gears, 2015-Present SUV non-towing mirror gears, door lock motors, door handle inserts !  Check out the GM section of our website!

 

Product Reviews

Previous | Showing reviews 521-530 of 637 | Next

  1. Very good quality, Easy Install 5 Star Review

    Posted by on 10th Jan 2018

    Part came timely, very simple install utilizing the step-by-step picture guide provided by Gruven. Only material addition I would suggest is to double-triple check the order and orientation of all the internal parts as you're taking it apart (it took me a couple of re-installs before getting everything to operate perfectly). Other than that, very simple piece to replace at a fraction of the cost for a new mirror...


  2. Awesome fix! 5 Star Review

    Posted by on 1st Jan 2018

    Great parts to fix my power mirrors. The biggest help was the instruction guide. Follow this and you can't go wrong. Thanks Gruven Parts!! Happy New Year!


  3. Worth every penny 5 Star Review

    Posted by on 28th Dec 2017

    Wanted to compliment you on your STRENGTHENED SPUR GEAR FOR 2007-2014 GM TRUCKS FOLDING MIRROR ASSEMBLY

    I am not the most mechanically inclined person (didn't get the gene from my dad), but I just finished installing the pair of the spur gear and hi torque motor on his 2009 Silverado 1500 LTZ.

    This was a total pain repair, but your instructions were very good. It took me about 2 days to do the repair (including cure time on the epoxy), and the mirrors fold faster than anytime since I got the truck from my dad almost 3 years ago.

    I now feel confident enough that I could do this repair for anyone. Thank you for a quality part.


  4. folding mirror repair 5 Star Review

    Posted by on 25th Dec 2017

    Workd just as described


  5. Thank you Gruven Parts 5 Star Review

    Posted by on 11th Dec 2017

    I've had 3 different trucks the same bodystyle with the same failing folding mirror motor gear. Thank you for this product and for creating a simple affordable solution for a common issue with these trucks. Will definitely recommend to everyone.


  6. Definitely Better Than OEM Plastic 4 Star Review

    Posted by on 9th Dec 2017

    I ordered this spur gear and motor to replace the plastic OEM spur gear. Initially the motor would only operate the power mirror a few times and then stop. After trying some troubleshooting with Paul I sent the motor back so he could file the motor teeth down a little When I got it back and installed it the motor operations 100% of the time for a week now. Thanks to Paul for getting it to work properly. I'm giving 4 stars instead of 5 just because I had to send the motor back for rework.


  7. Paul is a rockstar! 5 Star Review

    Posted by on 6th Dec 2017

    While this is a product review, I'd like to start this with the exceptional customer service offered by Paul. He was very fast to reply to my emails, offered a call to answer even more questions I had. Paul went above and beyond to assure everything is working as it's supposed to. This is so very much appreciated!

    Now to the product itself: 100% satisfied. I will buy it again if the other mirror breaks down. Everything fits and works as it is supposed to. The DIY guide was super helpful.


  8. Much improved part 5 Star Review

    Posted by on 5th Dec 2017

    I didn’t install it yet (couldn’t find a tool to compress the spring). I like The fact that the spur gear is brass instead of the brittle plastic.


  9. Product great, but customer service far above expectations 5 Star Review

    Posted by on 3rd Dec 2017

    I followed the well-written instructions to install the much needed replacement parts. I must have done something wrong, and Paul bent over backwards to assist me and getting my vehicle back on the road. I would venture a guess that one will not find a more proactive customer service philosophy than what Paul provides. THANK YOU THANK YOU THANK YOU for help!!! And everything is working better than new!

    -- response --

    Thanks Jim, let us know if you need anything else. 1st and foremost we want to make sure everyone gets their mirrors working again properly without the need to visit GM dealer for overpriced plastic bits that will break. This should fix it forever and definitely call me again if you need to!

    Paul@GruvenParts.com


  10. Quality parts 5 Star Review

    Posted by on 28th Nov 2017

    The product is quality and installation was easy. Only difficult part is waiting for the epoxy to set. Wished they would had included some grease for the installation at this price. Overall, still very happy!

    -- response --

    Thanks Eddie, glad you got it fixed. I will look into where to get small qty of gear grease to include in the kit, that is a good suggestion!

    Paul@GruvenParts.com


Previous | Showing reviews 521-530 of 637 | Next



Find Your Part

Recent Updates

Newsletter Sign Up




ABOUT SSL CERTIFICATES